|
Title: leon cupra r xdf Post by: adeyspec on October 16, 2013, 12:01:32 PM I have pulled this map from my new (new to me) leon cupra r (bam 225 engine), was told it was re-mapped but the xdf i have doesnt seem to line up? i fitted an 80mm tip and now im getting maf signal too high so would like to take a look. I replaced the maf thinking it might be faulty with a brand new item and still get the same fault code. Not played for about 6 months with any ecu so need to get my head back around it again. If any one could help i would be very great full. thanks in advance
adey Title: Re: leon cupra r xdf Post by: adeyspec on October 16, 2013, 01:03:26 PM and just to confirm if i could (like i said ive not tinkered for a while) if i just set KFMLDMX to the maximum to get rid of the maf signal to high fault? that's if i can find it in my map.
Title: Re: leon cupra r xdf Post by: ddillenger on October 16, 2013, 01:15:08 PM Log your MAF on a 3rd gear pull before you start maxing diagnostic functions.
Title: Re: leon cupra r xdf Post by: adeyspec on October 16, 2013, 01:19:32 PM im on a 6 speed box, would 4th be preferred? ill pull some tomorrow and let you know, only happened after fitting a bigger turbo intake pipe and airfilter.
Title: Re: leon cupra r xdf Post by: adeyspec on October 17, 2013, 04:33:00 AM 2 pulls from today
if you need them in a different format let me know, ive cut out as much crap as possible. |