NefMoto

Technical => Flashing and Chipping => Topic started by: GWerks on October 19, 2013, 07:51:33 AM



Title: Security lockout countdown running on ME7.5 (MKIV GTI)
Post by: GWerks on October 19, 2013, 07:51:33 AM
Forgot to check the checksums, can someone tell me what pin I need to ground on the ECU to get it into bootmode? The ECU is in the car.

Thank you very much,
GWerks


Title: Re: Security lockout countdown running on ME7.5 (MKIV GTI)
Post by: GWerks on October 21, 2013, 04:43:35 AM
I have been trying to ground pin 24 on the 800BB chip and and Galletto says BOOT MODE INACTIVE, am I doing something wrong?


Title: Re: Security lockout countdown running on ME7.5 (MKIV GTI)
Post by: maZer.GTi on October 21, 2013, 06:51:59 AM
I have been trying to ground pin 24 on the 800BB chip and and Galletto says BOOT MODE INACTIVE, am I doing something wrong?

Ground the Pin only for about 2-3 Seconds, and then remove gnd from pin.


Title: Re: Security lockout countdown running on ME7.5 (MKIV GTI)
Post by: GWerks on October 21, 2013, 11:39:13 AM
Tried it on the bench, held it for 2-3 seconds...still says BOOT MODE INACTIVE. HALPPP


Title: Re: Security lockout countdown running on ME7.5 (MKIV GTI)
Post by: ddillenger on October 21, 2013, 01:22:26 PM
Bootmode:

Ensure ECU power is OFF. Ground pin 24. Power up ecu. Continue to keep pin 24 grounded for an additional 10 seconds. Remove ground from pin 24.