|
Title: Galletto read error - changine speed error Post by: Waspjr on October 19, 2013, 12:50:23 PM Hello all i am fairly new here and i am trying to gather all the info i can on ecu related topics i purchased galletto it installed fine and i got the drivers installed i am running win 7 32 bit and i get a changing speed error when i try and read my ecu. I have tried it on my other laptop it is running vista and i cant get it to recognize the driver files that came with the dongle. If any one can shed some light on this it would be greatly appreciated.
I am running a a4 1.8t 2005 fwd cvt Thanks again Title: Re: Galletto read error - changine speed error Post by: gigabyte on October 19, 2013, 01:09:49 PM As it says changing speed have you tried reading at a different speed? Hopefully someone with a Galletto can get some answers for you. Also have you tried running the program as an Administrator? Doubt that's the problem but you never know :-\
Do you have any other cables i.e MPPS or a cable you can use with Nefmoto? Title: Re: Galletto read error - changine speed error Post by: k0mpresd on October 19, 2013, 01:28:02 PM theres no need to click ecu data. just click the read button.
and yay! clone tools. Title: Re: Galletto read error - changine speed error Post by: Waspjr on October 20, 2013, 03:24:25 PM Thanks for the replies :) i have tried to just read ecu and also ecu data i have also tried both ecu options for my car. But as gigabite had said i do have a ross tech cable that i am going to try with the nef software if i am correct i just have to put the cable into dumb mode i will try this tonight.
Thanks again Cheers Title: Re: Galletto read error - changine speed error nefmoto worked for read tho Post by: Waspjr on October 21, 2013, 08:13:04 PM well I managed to get it figured out I used my rosstech cable in dumb mode at 38400 baud 29f800bb and it worked I pulled my first bin :) it wouldn't work at any other setting I just did trial and error
thanks Title: Re: Galletto read error - changine speed error Post by: gigabyte on October 22, 2013, 03:43:39 AM Glad you got it sorted :)
|