NefMoto

New xdf generated, this time for 06A906032LP_0261207955_367518

Rom is available at http://www.nefariousmotorsports.com/forum/index.php?action=dlattach;topic=438.0;attach=419

xdf contains:

(http://i272.photobucket.com/albums/jj172/spen0007/06A906032LP_0261207955_367518_publish.jpg)

the xdf will probably crash tunerpro if you open the large mlhfm map, but the data is in there if you want to swap mafs.

Also works for a 06A032032PL

Thanks

Thank you Spen.

Spen, if you add a hack to automatically swap axes if one is >512 and the other isn't, tunerpro won't puke on it :)

Thanks spen.

I have a question.  Are you doing anything special with tuner-pro to display the tables properly?  I am having a hell of a time understanding my teleprompter on these maps.  Here is one example, I open the driver desired lambda and I get crazy graphs (at least it looks that way to me).  Any thoughts?

Thanks,

Matt

Ori link is not working so here it is

Did anyone have an answer to Torch's question? I seem to get strange values in the x-axis particularly.

Try re-downloading the files and update TunerPro.  I just did both and I have what appear to be the appropriate graphs and values.  I did seem to lose a lot of options that I had before though (in my list view from my previous post) now the Parameter tree looks exactly like Spen's.  I am currently using TunerPro 5.00.7686.00.  Give it a shot and see if it is a version issue.

Matt

Do you mean 06A906032PL?

Sorry to bump and old thread...

How I can get the XDF file ? tnx

Tried that, and everything seems fine now except for the labeling of the load values. I'm just looking at KFZW for instance...X axis (should be load?)...Actual values look ok, just the table seems misrepresented. Any suggestions?

If I use this definition, and the original file, with a fresh TunerPro install, I get a lot of maps that have incorrect values in the axis. Is it just me?  :)

LAMFA RPM Displayed weird for me when i was using that file to compare to make an RN xdf - i edited the significant digits to make it viewable

I'm pretty new to modifying definition files, only having added a few extra maps to existing ones I've found on the net. Could you give a general explanation of what I need to change under what circumstances? Also do you know why are different people seeing different things using the same xdf and ori file? It seems I've seen this in other threads..Like I said before all the data of the actual map looks correct, just the axis are not. Thanks for your response, btw.

this is the same file above just with the significant digits changed on a few items (i think - its been awhile since i looked at that xdf).

Thanks for your help, smelly. I still seem to be having issues...x axis should be load, but look at this screenshot.

The factor is wrong. Change it to .02348x (edit xdf parameter, find the axis, go to conversion). Looks like it is .75x now.

You are correct, and changed it..Looks to be correct now. There are other maps within this xdf that look off as well axis-wise..

1. Do you just know from experience what the conversion factor for this particular map is?
2. Why was it wrong in the first place?
3. I'm surprised no one else mentioned this, or is it just a given most of the time one needs to fix the maps/offsets/axis/address?

Thanks again, D...I've been randomly switching things within the xdf for 20 minutes at least hoping I might get lucky. :)

Also. did you mean to say 0.023438?

any chance this can be updated with the all of the maps found in the LP-PL map pack in this thread?

http://nefariousmotorsports.com/forum/index.php?topic=866.0

or at least guide me on how i can port the maps over... thanks!

i've figured out how to port the missing stuff over from the WinOLS map packs, cheers