|
Title: DTC code removal ME7.5 Audi Post by: learning1 on October 27, 2013, 04:59:20 PM I think checksum area is the most suitable place to post this request.
I wanted to discuss the most preferred way to remove Pcode from this ECU. I have a tool that can do this on VWme7.5 but does not support audi software versions. I am trying to remove P0411 and P0441. This is a 2004 running a 2002 cylinder head. Cheers guys. Title: Re: DTC code removal ME7.5 Audi Post by: littco on October 28, 2013, 12:52:07 AM I think checksum area is the most suitable place to post this request. I wanted to discuss the most preferred way to remove Pcode from this ECU. I have a tool that can do this on VWme7.5 but does not support audi software versions. I am trying to remove P0411 and P0441. This is a 2004 running a 2002 cylinder head. Cheers guys. Sai removal.. Have a search and look at the s4wiki as that has the variables needed to turn it off Title: Re: DTC code removal ME7.5 Audi Post by: learning1 on October 29, 2013, 09:31:05 PM excellent. I have found it.
I take it MSLUB is now the preferred method to pass e-tests also. Disable SAI diagnosis CDSLS - Eurobyte CLASLVE - Plug CLASLPE - Pump plug Disable SAI CWKONABG - set to zero if you have removed your SAI system or it doesn't function properly Simply disabling diagnosis is generally not sufficient.[57] Another method: MSLUB - set to zero[58] Title: Re: DTC code removal ME7.5 Audi Post by: ddillenger on October 29, 2013, 09:35:38 PM Leave CLASLVE and CLASLPE alone, and use ESKONF. If you pull the relay and use CLASLVE and SLPE, you kill fuel trims.
|