|
Title: ME7 W-line location (PIN) Post by: f1torrents on November 04, 2013, 06:25:58 AM I'm looking for the PIN for the W-line on ME7.5, ME7.1 and ME7.1.1
I think it will be the same on all of them. -EDC15 its PIN-16 -ME7x its PIN-?? Thanks in advance... Title: Re: ME7 W-line location (PIN) Post by: terok on November 04, 2013, 08:01:44 AM 43
Title: Re: ME7 W-line location (PIN) Post by: f1torrents on November 04, 2013, 10:10:31 AM Thank you.
Title: Re: ME7 W-line location (PIN) Post by: f1torrents on November 04, 2013, 03:35:54 PM Oops.
43 is the k-line I'm looking for W-line Title: Re: ME7 W-line location (PIN) Post by: terok on November 04, 2013, 04:01:18 PM Wire from ecu to immobiliser is called W-line, allthough it is same as K-line.
Title: Re: ME7 W-line location (PIN) Post by: f1torrents on November 04, 2013, 06:32:52 PM Thank you.
The answer was right in front of me with the EDC15 pin number. I was just looking at too many wires for too long. Kompresed caught this and let me know as well. Thanks again guys. Got the info I needed. I was adapting immo3 keys on the bench with a MK4 VDO cluster (with CAN Gateway built into the cluster) Here is the diagram if anyone wants to have a look. Very rare you would need this setup but its nice for testing. |