|
Title: ME7 Galletto 2 Boot Cable Post by: rrdiagnostic on November 14, 2013, 12:50:51 PM Hey guys... i'm new in chipping... i want to flash my me7 and have a galletto 2.
I can't read it in boot mode... is anyone here who is using galletto 2 in boot mode?? Can anyone tell me which cable (color) i have to use for k-line???????? Title: Re: Re: ME7 Galletto 2 Boot Cable Post by: n0ble on November 14, 2013, 05:33:06 PM I thought kline was green?
Title: Re: AW: ME7 Galletto 2 Boot Cable Post by: rrdiagnostic on November 15, 2013, 12:14:00 PM You thougt or you know it??:-\
Title: Re: Re: Re: AW: ME7 Galletto 2 Boot Cable Post by: n0ble on November 15, 2013, 02:19:46 PM You thougt or you know it??:-\ Dude Google is your friend and yes K-line is green. Title: Re: AW: ME7 Galletto 2 Boot Cable Post by: rrdiagnostic on November 17, 2013, 02:07:15 AM Thanks... i will try it so...;)
Title: Re: AW: ME7 Galletto 2 Boot Cable Post by: rrdiagnostic on November 17, 2013, 02:15:56 AM I didn't found anything at google about this... and in the cableplan from fg tech is ignition the green one...
Do i have contact the boot pin before voltage on or after ??? Title: Re: Re: Re: AW: ME7 Galletto 2 Boot Cable Post by: n0ble on November 17, 2013, 01:51:32 PM I didn't found anything at google about this... and in the cableplan from fg tech is ignition the green one... Do i have contact the boot pin before voltage on or after ??? Yes it can also be used for ignition. But do not wire to ignition pin, wire it to k-line pin. Connect the boot pin to ground before voltage then remove from ground after around 10 seconds Title: Re: Re: ME7 Galletto 2 Boot Cable Post by: n0ble on November 18, 2013, 10:53:25 PM What is the actual version of the ECU?
ME7.1, 7.5 or 7.7? Title: Re: AW: ME7 Galletto 2 Boot Cable Post by: rrdiagnostic on November 19, 2013, 04:02:35 AM Its a me7.1
AM29F800BB Title: Re: Re: Re: AW: ME7 Galletto 2 Boot Cable Post by: n0ble on November 19, 2013, 04:50:55 AM Its a me7.1 AM29F800BB Ok then yes carry on with that process. Title: Re: AW: Re: Re: Re: AW: ME7 Galletto 2 Boot Cable Post by: rrdiagnostic on November 19, 2013, 09:36:08 AM Yes it can also be used for ignition. But do not wire to ignition pin, wire it to k-line pin. Ok... only for understanding...Connect the boot pin to ground before voltage then remove from ground after around 10 seconds I connect the boot pin for 10 seconds to ground, remove it and then voltage to read or write...;) Title: Re: AW: Re: Re: Re: AW: ME7 Galletto 2 Boot Cable Post by: oldcarguy85 on November 19, 2013, 09:45:59 AM Ok... only for understanding... I connect the boot pin for 10 seconds to ground, remove it and then voltage to read or write...;) 1. ground boot pin 2. apply power 3. remove ground from boot pin after 3 seconds Title: Re: AW: ME7 Galletto 2 Boot Cable Post by: rrdiagnostic on November 19, 2013, 11:05:05 AM Ok... thx you guys... i'll try it at weekend and report...
Title: Re: Re: Re: AW: ME7 Galletto 2 Boot Cable Post by: n0ble on November 19, 2013, 12:53:04 PM Ok... thx you guys... i'll try it at weekend and report... No problem, ensure that you only use 1 green wire to k-line. Do not put a second green wire to ignition as it's not required Title: Re: Post by: n0ble on December 05, 2013, 03:22:45 PM So did you ever get this working?
Title: Re: ME7 Galletto 2 Boot Cable Post by: Bosse on December 06, 2013, 12:41:01 PM Is it clone?
If it is i am sure it will not work. Hardware problems. Try galetto 1260 or mpps,kkl cabel with minimon. Title: Re: Re: Re: ME7 Galletto 2 Boot Cable Post by: n0ble on December 06, 2013, 02:09:41 PM Is it clone? If it is i am sure it will not work. Hardware problems. Try galetto 1260 or mpps,kkl cabel with minimon. Just Lol.......................... |