|
Title: BDM pogo pins Post by: n0ble on November 18, 2013, 05:13:00 PM Hi,
I have the Chinese version bdm connectors but I do not like the needle pogo pins. I want to replace with some flat based pogo pins. Does anyone know what size diameter I need for the bosch and Siemens adapters? I dont have a vernier gauge to that accuracy level. Thanks Title: Re: BDM pogo pins Post by: n0ble on November 24, 2013, 07:13:14 AM Don't know if anyone is actually bothered about this.
But I found the pins that fit the Chinese adapters. Probably not so great for the hollow circle contacts as you'll need pins for those, but for solid circular pads such as on Bosch these should work fine. http://www.amazon.co.uk/PL75-Q2-1-2mm-4-Point-Spring-Probes/dp/B008OTLXF0/ref=sr_1_1?ie=UTF8&qid=1385302362&sr=8-1&keywords=pl75-q2 |