|
Title: 1.8T AWW 06A906032DL Need some help with my codding! ;) Post by: sh0ck on November 18, 2013, 05:54:24 PM Hi guys, I'm new in this amazing scene and I need some guidance..
My car is a Jetta 1.8t AWW The past Week-end I make some cleanup on my Engine bay. Remove the SAI, N80, N249 and LDP. the Usual "evap Delete". But instead of putting some resistors on the harness I was trying to seek for an cleaner option ;) My ECU is the 06A906032DL SW 360227. I've found a definition file on the site but the XDF didn't contain what I was looking for. But this guy posted that info ;) AmIdYfReAk, because I like you: (http://i.imgur.com/gKRzr.png) This is for 032DL SW 360227 only. There is two (or more) versions of DL out there. I've edited the XDF, set what I want to delete to 0 and flash my ECU... Unfortunately two code still here 17834 and 17695 (also 17931 but it's an other story) can anyone tell me if I missed something ? my BIN is attached if someone could double check it, that would be great :) sh0ck Title: Re: 1.8T AWW 06A906032DL Need some help with my codding! ;) Post by: adam- on November 19, 2013, 04:45:10 AM EVAP and the 249 haven't been coded out properly.
I can do the 249, but not sure how to do the EVAP. DD helped me do the EVAP, so hopefully he'll be along to explain. Title: Re: 1.8T AWW 06A906032DL Need some help with my codding! ;) Post by: oldcarguy85 on November 19, 2013, 07:19:50 AM which xdf are you using? The one i have for 032DR matches up and its very complete. I haven't checked for the evap stuff yet. Wiki says the following... are these in your XDF?
CDTES - Eurobyte - LDP Diagnosis CDLDP - Eurobyte - EVAP diagnosis CLATEVE - EVAP plug CLALDPE - LDP plug Title: Re: 1.8T AWW 06A906032DL Need some help with my codding! ;) Post by: ddillenger on November 19, 2013, 02:36:35 PM CLAXXX are not required if you configure ESKONF. Using the error classes will result in non-working trims.
Title: Re: 1.8T AWW 06A906032DL Need some help with my codding! ;) Post by: sh0ck on November 19, 2013, 03:27:28 PM @OldcarGuy85 I use this one http://nefariousmotorsports.com/forum/index.php?topic=3914.
I added CDTES, CDLDP, CLATEVE, CLALDPE manually based on the printscreen shared by AmIdYfReAk. @ddillenger Yeah I read some interesting thing last night about the ESKONF... Should I leave CLAXXX alone and edit the ESKONF to disable my things? right now with the N249 connected on the harness my CEL stay off and i don't hit limp mode... I have fixed the CLATEVE yesterday... error on my edited XDF I'll try with the ESKONF wit this coding AA FF 00 33 FF FB FC |