|
Title: Weird immo behavior Post by: cybertronics on December 15, 2013, 02:02:36 AM Hey guys i'm new here. I did a little diggin around and it seems to be i'll be here more ;D but i really need help.
i hava a 99 akl golf. 3 yrs ago my immo activated somehow and i towed my car to a local garage and did a immo off. 3 years it worked perfect but now i have the same problem again. And now my car stops after 1 sec of run. When i try to start with original key with immo coil no immo light on the dash if i try with aftermarket key without coil , immo light flashes but in both cases car runs and stops after 1 sec. Where do i have to look. Show me a way :) I was a real rookie 3 years ago and i really dont know what local garade did to make immo of. I now have a kkl and tacho cable but still not a pro and my knowledge couldnt solve my problem. Sorry for my bad english. Title: Re: Weird immo behavior Post by: f1torrents on December 15, 2013, 07:58:44 AM Use ArgDubs tool and dump the e2p eeprom from the ECU and post it here.
Its called ME7EEPROM there is a sticky and a million pages of info on it. We will take a look and see what was done. Title: Re: Weird immo behavior Post by: cybertronics on December 16, 2013, 01:41:59 PM Here is the result;
I tried to dump eeprom with ArgDubs but failed. (but i can do a scan etc.) Finally i removed the ecu to look inside of the box and voila! 93c56 fall when i open cover of the box. Probably eprom had a repair before because pcb's eprom solder points are also demaged (not recoverable) So i need a new ecu and please give me some advice. Do i have to buy exactly same PN ECU or do i have any other choices like 06A906019 , E , BQ etc. An here how it looks (http://u1312.hizliresim.com/1j/j/vlvrs.jpg) (http://bit.ly/c25MCx) |