|
Title: immo off 95040 request and help to learn how to Post by: jogtx16v on January 07, 2014, 05:58:27 PM Hello
I have in attachement 95040 . came from my 032CL need help to immo off the chip is ST9948 / 950403 Thank you. and I need to learn how to immo off myself. I have HxD hexa editor. need more ? If anybody can help my here or in pm it will be very apreciated ;) (http://img4.imageshack.us/img4/9363/56hf.jpg) (http://imageshack.us/photo/my-images/4/56hf.jpg/) Uploaded with ImageShack.us (http://imageshack.us) Title: Re: immo off 95040 request and help to learn how to Post by: IamwhoIam on January 07, 2014, 07:25:01 PM It's all been covered dozens of times on here, how about using the "search" function?
Title: Re: immo off 95040 request and help to learn how to Post by: darkshado87 on January 07, 2014, 07:35:00 PM immo offed. there is a kp. file for winOLS for immo off or use your hex editor to compare
Title: Re: immo off 95040 request and help to learn how to Post by: jogtx16v on January 07, 2014, 07:41:59 PM It's all been covered dozens of times on here, how about using the "search" function? I search a lot with ''search'' function but dosen't find. maybe im using the wrong word. not sure Title: Re: immo off 95040 request and help to learn how to Post by: jogtx16v on January 09, 2014, 09:08:00 AM thank you very much darkshado87 !
after some research I found how to immo off 95040 file. :) Can I just change extension .ols to .bin ? or It required winols and save as .bin ? And for futur immo off, can I do just editing the 4 bytes with hexa editor instead to use winols ? Title: Re: immo off 95040 request and help to learn how to Post by: jogtx16v on January 09, 2014, 03:23:47 PM Can I just change extension .ols to .bin ? or It required winols and save as .bin ? And for futur immo off, can I do just editing the 4 bytes with hexa editor instead to use winols ? someone can confirm if im ok ? Title: Re: immo off 95040 request and help to learn how to Post by: ddillenger on January 09, 2014, 04:15:54 PM No, you can't change an OLS to bin, but shadows file isn't an OLS. Just rename his file .bin and it'll be fine.
Title: Re: immo off 95040 request and help to learn how to Post by: jogtx16v on January 09, 2014, 07:55:34 PM thank you very much ddillenger ;)
Title: Re: immo off 95040 request and help to learn how to Post by: jogtx16v on January 10, 2014, 12:36:42 PM This is possible to clear all DTC after bench setup ecu's ??
many dtc's such as : 16622 - Manifold Pressure / Boost Sensor (G31): Signal too High P0238 - 35-00 - - 18058 - Powertrain Data Bus: Missing Message from Instrument Cluster P1650 - 35-00 - - 17925 - Main Relay (J271): Electrical Malfunction P1517 - 35-00 - - and some other... I have tried clear with vcds in the bench but no sensor at all , all code recur. Title: Re: immo off 95040 request and help to learn how to Post by: ddillenger on January 10, 2014, 02:42:31 PM of course those codes recur, the ecu isn't in the car. You can never clear ALL codes on the bench. Those will disappear as soon as you install it.
|