|
Title: Locating some maps in 4z7 907 551 R, Kfmiop specifically. Post by: stuklr on January 12, 2014, 01:14:17 PM I have a good xdf started for the Rbox me7.1.1
I have added KFmirl and now looking at KFMIOP. The auto generated xdf shows the values off. The axis look fine, but the map is wrong. Seems lije the last five columns are in the wrong order. xdf address shows starting at 0x167FE with column addresses at 0x16960 and rows at 0x1322A. Here is what I have. Title: Re: Locating some maps in 4z7 907 551 R, Kfmiop specifically. Post by: ddillenger on January 12, 2014, 03:28:19 PM Those addresses are correct. Something about that xdf parameter isn't though.
Title: Re: Locating some maps in 4z7 907 551 R, Kfmiop specifically. Post by: stuklr on January 12, 2014, 04:47:00 PM The raw hex for the table looks just like the calculated values. the last five columns should be the first. I thought the address was starting in the middle.
I did a comparison to the good M box xdf I use and the table constraints are identical except for the addresses. I attached my xdf to this stage. All the maps for usual changes are in the "my maps" top category. " Title: Re: Locating some maps in 4z7 907 551 R, Kfmiop specifically. Post by: ddillenger on January 12, 2014, 04:51:28 PM Post your bin.
Title: Re: Locating some maps in 4z7 907 551 R, Kfmiop specifically. Post by: stuklr on January 12, 2014, 04:53:32 PM This one I have been modifying.
Title: Re: Locating some maps in 4z7 907 551 R, Kfmiop specifically. Post by: stuklr on January 12, 2014, 05:00:19 PM No need now. Just did a comparison. Looks like I modified KFMIOP when using the wrong xdf and the was confused by the values I put in....
Sometimes I shoudl just go to bed instead of trying to finish something. Title: Re: Locating some maps in 4z7 907 551 R, Kfmiop specifically. Post by: terminator on January 19, 2014, 07:38:37 PM There is 551R DAMOS into net.
|