|
Title: stg3,frankenturbo emiss delete, 20psi, 52lb inj, 85maf, 4bar, 044 fp Post by: S4dizzle219 on January 17, 2014, 05:42:07 PM soooo. i have a written tune from an unannounced tuner, i am having issues with i installed fuel pump and switched the maf. this is all that was done to car before the flash. My car now has the positive deviation code and will not clear even upon start up. I had no running issues w/ the car before the switch boosting steady 18lbs all day everyday. so my question is what do you see.
Title: Re: stg3,frankenturbo emiss delete, 20psi, 52lb inj, 85maf, 4bar, 044 fp Post by: ddillenger on January 17, 2014, 06:03:29 PM We need raw csv logs taken with me7logger. Without those, noone is going to look I'm afraid.
Title: Re: stg3,frankenturbo emiss delete, 20psi, 52lb inj, 85maf, 4bar, 044 fp Post by: S4dizzle219 on March 02, 2014, 10:51:52 AM My kII USB rosstech cord will not log on ME7 do I have to buy the ebay cord?
Title: Re: stg3,frankenturbo emiss delete, 20psi, 52lb inj, 85maf, 4bar, 044 fp Post by: S4dizzle219 on March 02, 2014, 10:54:50 AM Also tuner says MAF still reading low which points to post MAF pre-turbo leak. I have pressure tested yo 25psi, and done a smoke tester several times. Mechanic says it's sealed up tighter than a virgin?
Title: Re: stg3,frankenturbo emiss delete, 20psi, 52lb inj, 85maf, 4bar, 044 fp Post by: Lost on March 02, 2014, 11:20:24 AM Also tuner says MAF still reading low which points to post MAF pre-turbo leak. I have pressure tested yo 25psi, and done a smoke tester several times. Mechanic says it's sealed up tighter than a virgin? Did you buy new Maf? Old ones tend to read lower with ageing Title: Re: stg3,frankenturbo emiss delete, 20psi, 52lb inj, 85maf, 4bar, 044 fp Post by: S4dizzle219 on March 02, 2014, 11:30:00 AM Brand new MAF, brand new o2's
Title: Re: stg3,frankenturbo emiss delete, 20psi, 52lb inj, 85maf, 4bar, 044 fp Post by: zillarob on March 02, 2014, 01:02:47 PM ebay cable is cheap, but maybe try this stuff first?
http://nefariousmotorsports.com/forum/index.php?topic=3138.0 Title: Re: stg3,frankenturbo emiss delete, 20psi, 52lb inj, 85maf, 4bar, 044 fp Post by: userpike on March 02, 2014, 02:55:49 PM My kII USB rosstech cord will not log on ME7 do I have to buy the ebay cord? If it's a genuine dongle, you need to go to the Ross-tech site and DL the generic drivers for it. It should work fine after. |