|
Title: IMMO off - ME7.5 - AM29F800BB - 95040 - GH Post by: johnny5 on January 18, 2014, 11:17:24 PM Hello, I was wondering if someone could give assistance with immo off for a ME7.5 - 06A 906 032 GH ecu to use as my test unit- AM29F800BB. Currently using Immo U D V3.2 and would need 95040 bin to immo off this GH unit. If anyone could help out with that 95040 immo off for GH unit would be much appreciated.
Title: Re: IMMO off - ME7.5 - AM29F800BB - 95040 - GH Post by: jogtx16v on January 18, 2014, 11:57:47 PM You just want to immo off ? you need the 95040 bin that is in your ecu . you need to read your 95040 eeprom with argdubs tool first. after you read the file its saved in .bin in your pc. after that you have to modify the.bin file an write to 95040 eeprom.
all this thing are made in bootmode. Title: Re: IMMO off - ME7.5 - AM29F800BB - 95040 - GH Post by: johnny5 on January 19, 2014, 12:13:26 AM okay great, ya I would like to immo of this GH unit that is not in use atm. I want to use it as a test unit, so I can perform some cross flashing and test a couple tunes with the GH unit. I will read the eeprom dump and try to post back if I run into any problems. much thanks for the reply. Literaly just found the youtube link/information for argdubs tool before you posted
Title: Re: IMMO off - ME7.5 - AM29F800BB - 95040 - GH Post by: jogtx16v on January 19, 2014, 12:29:10 AM this post are great to start http://nefariousmotorsports.com/forum/index.php?topic=5068.0title=
for immo off the file, with Immo U D V3.2 you are good. Title: Re: IMMO off - ME7.5 - AM29F800BB - 95040 - GH Post by: johnny5 on January 19, 2014, 01:32:09 PM perfect. grounding pin 24 worked very well on v1.31. Then immo off the file with Immo U D V3.2.
I wanted to make this GH into a dedicated test unit, since I have no other used for it, soldered a female wire connection right to pin 24 Much Thanks |