|
Title: me 7.5 virgin immo dump no dtc Post by: bazaa on April 19, 2011, 11:02:48 AM I thought this might be of use to someone ,this is not an original of mine just picked it up along the way.
Title: Re: me 7.5 virgin immo dump no dtc Post by: Tony@NefMoto on April 19, 2011, 11:17:28 AM Thanks for taking the time to post this.
Title: Re: me 7.5 virgin immo dump no dtc Post by: RaraK on May 09, 2011, 08:06:08 PM mapped out....
Not sure on accuracy beyond checksumming and immo off Title: Re: me 7.5 virgin immo dump no dtc Post by: Dobermann on August 30, 2011, 11:31:11 AM in this eeprom dump is the immo off and login code is set to FFFF
the dump is not virgin Title: Re: me 7.5 virgin immo dump no dtc Post by: automan001 on October 16, 2011, 10:50:22 AM How to make really virgin dump or where to get it?
What is meaning of first 16 bytes in the dump (first page FF 5A)? Some other me 7.5 eeproms start with immo on/off pages... Title: Re: me 7.5 virgin immo dump no dtc Post by: MmmBoost on October 28, 2011, 01:05:36 PM What vehicle is this from?
ECU #? Title: ME7 IMMO OFF ALL!! Post by: learning1 on November 14, 2011, 01:53:31 PM LOOK at the top line.
If your ECU starts with 12 68 30 14 or similar this will work. Others that start different I can't promise but have tested with success. Usefull for 2nd ECU testing in a car without coding JUST Write this file. For ST5P08 chip write the bigger file just FFFF for extra space. if your programmer doesn't support ST5P08 use 95080 instead for this chip. HAve FUN!! Title: Re: me 7.5 virgin immo dump no dtc Post by: focalpoint519 on July 03, 2017, 04:51:55 PM Im getting VCD 18045 error Intermitent Control Module EEPROM error (p1640) with this file over a 06A 906 032 LP ecu with 7500 coding. what am i doing wrong?
|