|
Title: MIL Post by: terminator on January 24, 2014, 10:25:56 AM As I know all US cars have check engine light, but the most of EU cars dont.
Though EU has check engine lamp inside dash. Could anyone please tell me how to activate this lamp? I suppose it can be coded into "instrument" via VCDS or its a codeword into ECU flash, but I'm not sure. Title: Re: MIL Post by: ddillenger on January 24, 2014, 02:02:51 PM Post your file.
Title: Re: MIL Post by: jimmcgee5 on January 24, 2014, 02:43:37 PM all uk cars I know of have MIL lights as well , my a4 light has been on since I got the car and seen all the crap pipework under the crap plastick engine cover ::) ;D
Title: Re: MIL Post by: terminator on January 25, 2014, 08:15:13 AM Post your file. Done. Its from Audi A4 1.8t 8E0909518BA Title: Re: MIL Post by: terminator on January 25, 2014, 08:55:58 AM all uk cars I know of have MIL lights as well , my a4 light has been on since I got the car and seen all the crap pipework under the crap plastick engine cover ::) ;D Ok) UK cars have it, but a lot of EU cars dont. Even EU Mercedes have this lamp, but it doesnt shine for a driver)) Title: Re: MIL Post by: ddillenger on January 25, 2014, 08:57:29 AM You can run 8E0909518AK without a problem, the calibration is the same. The only difference I see is the CDLDP and some changes to the ODB protocols.
In any event, try this. It's your file with a few small changes. Title: Re: MIL Post by: terminator on January 25, 2014, 09:28:49 AM You can run 8E0909518AK without a problem, the calibration is the same. The only difference I see is the CDLDP and some changes to the ODB protocols. In any event, try this. It's your file with a few small changes. Thanx! I wiil check the dashboard coding also. Title: Re: MIL Post by: terminator on January 26, 2014, 03:45:39 PM I have no chance to check your file yet, but my US car has MIL lamp, so I just change 03 03 prokanal to 05 00 (like into 518BA file without MIL), but MIL still lights on.
I think it can be coded into Instrument via VCDS... Will see... Thanx anyway! Title: Re: MIL Post by: ddillenger on January 26, 2014, 03:56:06 PM Flash a US file, or try mine. There are 3 changes.
Title: Re: MIL Post by: terminator on January 26, 2014, 04:09:50 PM Its my mistake, actually I changed the third prokanal bit to 01 from 00 also.
|