|
Title: Can't soft code out DCTs! M-box on euro c-box car Post by: smurfbus on January 26, 2014, 08:02:51 AM I have tried different vardefs and different login codes (13737 and 11463) on vcds but nada. I can only change 06611 to 06711 but not the needed 05211 or 10211 as my car has no ASR/ESP and no CAN either?
Is there something I can do or forgot to do? I have FF'ed the ESKONF bytes 1,3,6 and 7 Address 01: Engine Labels: 078-907-551-AZA.lbl Part No: 8D0 907 551 M Component: 2.7l V6/5VT G 0001 Coding: 06611 Shop #: WSC 87119 VCID: 346A1131043DC0BE40B-5102 3 Faults Found: 17881 - EVAP Leak Detection Pump P1473 - 35-00 - Open Circuit 17931 - Crash Signal from Airbag Controller P1523 - 35-00 - Implausible Signal 18014 - Rough Road/Engine Torque Signal from ABS P1606 - 35-00 - Electrical Malfunction Readiness: 0000 0000 Title: Re: Can't soft code out DCTs! M-box on euro c-box car Post by: armageddon on January 28, 2014, 04:10:30 PM To remove EVAP http://s4wiki.com/wiki/Tuning
To remove P1523 go to 0x10735 and change 13 to 00 To remove P1606 go to 0x10730 and change 13 to 00 Title: Re: Can't soft code out DCTs! M-box on euro c-box car Post by: smurfbus on January 31, 2014, 02:47:06 AM Thanks
Still have evap P1473 DTC though (LDP circuit open circuit). Done these below as per s4wiki: Evaporation CDTES - Eurobyte - LDP Diagnosis CDLDP - Eurobyte - EVAP diagnosis CLATEVE - EVAP plug CLALDPE - LDP plug Title: Re: Can't soft code out DCTs! M-box on euro c-box car Post by: ddillenger on January 31, 2014, 10:11:58 AM Change 10C77 from E3 to EF.
Title: Re: Can't soft code out DCTs! M-box on euro c-box car Post by: smurfbus on February 03, 2014, 07:25:32 AM That did not help?
Title: Re: Can't soft code out DCTs! M-box on euro c-box car Post by: ddillenger on February 03, 2014, 07:47:19 AM Post the file that it "didn't help" please.
Title: Re: Can't soft code out DCTs! M-box on euro c-box car Post by: smurfbus on February 04, 2014, 10:51:19 PM I checked the bin and the change I set/saved was not there? Sometimes tunerpro does not really save the saved values so for now on I will double check the values are saved properly. I did not check the code yet but hopefully its gone now.
Title: Re: Can't soft code out DCTs! M-box on euro c-box car Post by: ddillenger on February 05, 2014, 12:07:59 AM I am 100 percent sure that the change listed will remove LDP circuit diagnosis.
Title: Re: Can't soft code out DCTs! M-box on euro c-box car Post by: smurfbus on February 23, 2014, 06:59:40 AM Just for follow up, you're 100% correct.
Title: Re: Can't soft code out DCTs! M-box on euro c-box car Post by: andysterling on January 21, 2021, 03:36:27 PM Not sure where start and apologies for resurecting this thread, but i've recently bought an 01.5 S4 B5 avant and have followed these guides, i now have a stage1 tune with disabled evap, absolutely cracking job from you guys :D
|