|
Title: Quick question for A6 3.0 Post by: insomniacxp1 on February 04, 2014, 02:21:55 PM If I'm going to try and read the ecu off an 03 A6 3.0, what memory layout should I choose? Tried to do some searching with a lot of results for 1.9/2.5/2.7 but apparently no one likes 3.0's hah
Title: Re: Quick question for A6 3.0 Post by: ddillenger on February 04, 2014, 02:45:37 PM There is very little chance nefmoto is going to read/write your 3.0, but the memory layout is 29F800BB.
Welcome, and good luck! Title: Re: Quick question for A6 3.0 Post by: insomniacxp1 on February 04, 2014, 03:02:28 PM Thank you! Also why wouldn't nefmoto be the desired device for this? Would winols be in that case?
Title: Re: Quick question for A6 3.0 Post by: _nameless on February 06, 2014, 04:57:50 AM Thank you! Also why wouldn't nefmoto be the desired device for this? Would winols be in that case? You guys really need to read! nefmoto software is just enough to mess up your day! go on ebay and buy mpps. this will read and write almost anything that youd want to. It also has bootmode recovery. WinOLS is for editing your binary once you read it from your car. |