|
Title: SAI questions on M-box. Post by: chokee on February 12, 2014, 12:11:35 PM 2002 S4 M-box. Coded out rear o2's, catalyst heating and SAI as per the wiki. Rear o2 hardware is gone. All SAI hardware is all still in place. No codes for 5000 km's.
Specifics for SAI: CDSLS - set to 0 CLASLVE - set to 0 CLASLPE - set to 0 CWKONABG - set to 0 ***ESKONF has only been modified to remove rear o2's. My SAI Pump still runs for about 2 minutes on a cold start. Should it still operate when it is coded out in this manner? Can I unplug the pump without modifying ESKONF and affecting fuel trim learning? I have been digging through information to try and find SLV (N112) and SLP (pump relay) bits on the M-box ESKONF with no luck. Anyone? :) Title: Re: SAI questions on M-box. Post by: ddillenger on February 12, 2014, 12:35:26 PM M-box doesn't have SAI, so there is no need to code anything out. What year/model is your car?
Title: Re: SAI questions on M-box. Post by: chokee on February 12, 2014, 12:38:04 PM 2002 Canadian S4 2.7 purchased with APR stage 1 modified T-Box. Moved to M-box to tune my RS6 turbos.
Title: Re: SAI questions on M-box. Post by: chokee on February 12, 2014, 12:43:39 PM So can I just unplug the pump?
Title: Re: SAI questions on M-box. Post by: ddillenger on February 12, 2014, 12:52:27 PM Yes, unplug the pump.
Title: Re: SAI questions on M-box. Post by: metyoo on February 18, 2014, 01:12:09 PM I owe `02 A6 with M box and it`s fitted with SAI.
Title: Re: SAI questions on M-box. Post by: prj on February 18, 2014, 01:13:22 PM Or set CWKONABG to 0.
Title: Re: SAI questions on M-box. Post by: nyet on February 18, 2014, 02:06:54 PM 8d0 mbox != 4z7 mbox
|