NefMoto

Technical => Flashing and Chipping => Topic started by: Cika on February 17, 2014, 03:06:59 AM



Title: ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE
Post by: Cika on February 17, 2014, 03:06:59 AM
I want to remap this ecu... and with galleto 1260..gets error while readnig ecu data VIA diagnostic port.. and i was reading on some forums..that i need to remap it on the table..

I need pins ( K line , ground , Positive (B+))

If i am missing something correct me. :D


Title: Re: ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE
Post by: terok on February 17, 2014, 04:46:20 AM
Cannot be done via OBD. 2x OTP ROMs inside, you need new chips to program.


Title: Re: ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE
Post by: Cika on February 17, 2014, 11:08:02 AM
Cannot be done via OBD. 2x OTP ROMs inside, you need new chips to program.
where can i find new EEPROM's ??? to fit this ecu ??


Title: Re: ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE
Post by: _mumin_ on February 17, 2014, 10:23:05 PM
Look for 29f010 PLCC32 this are programmable flash chips.


Title: Re: ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE
Post by: Cika on February 18, 2014, 12:32:34 AM
Look for 29f010 PLCC32 this are programmable flash chips.
Thanks... but how am i going to program them... via the obd port.. or on the table... with the three pins.. k line ground B+  ???



http://www.aliexpress.com/item/IC-new-original-AM29F010B-70JC-AM29F010B-AM29F010-29F010-PLCC32/1559152424.html (http://www.aliexpress.com/item/IC-new-original-AM29F010B-70JC-AM29F010B-AM29F010-29F010-PLCC32/1559152424.html)  Are these ok ??


Title: Re: ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE
Post by: ddillenger on February 18, 2014, 12:42:15 AM
You cannot write that ecu. You must buy new eeproms and program them in a chip writer. I use a GQ4X.


Title: Re: ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE
Post by: Cika on February 18, 2014, 12:54:43 AM
You cannot write that ecu. You must buy new eeproms and program them in a chip writer. I use a GQ4X.
OK thx for the info... is there a cheaper.. Chip writer ... and are those chips on aliexpress  ok (for programing and that will work with the ecu) ???


Title: Re: ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE
Post by: _mumin_ on February 18, 2014, 01:14:08 AM
Yes those chips are ok. You want cheaper than GQ4X ? It's 100$ come on.


Title: Re: ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE
Post by: Cika on February 18, 2014, 07:40:28 AM
Yes those chips are ok. You want cheaper than GQ4X ? It's 100$ come on.
I dont have a store...where i can buy it... i need to order it from the internet...
can you type more chip writers... (i will search them on aliexpress...and order..one)

(can it be done with BDM 100 ??? )
or this one
http://www.aliexpress.com/item/Best-price-xprogm-ecu-programmer-full-authorization-XPROG-m-V5-0-XPROG-M-programmer-with-multi/694501276.html (http://www.aliexpress.com/item/Best-price-xprogm-ecu-programmer-full-authorization-XPROG-m-V5-0-XPROG-M-programmer-with-multi/694501276.html)