NefMoto

Vehicles => Vehicle Tech => Topic started by: szrat28 on March 16, 2014, 04:33:04 PM



Title: b5 s4 srm rs6 k24s fuel system & intake advice?PLEASE
Post by: szrat28 on March 16, 2014, 04:33:04 PM
Ok I just had srm k24s put on my b5 s4 with stock fueling. What size/type injectors fuel pump and intake should I get dw300 fuel pump srm intake w/85mm maf and bosch ev14 52lb(550cc) injectors. Will this work any advice would be appreciated


Title: Re: b5 s4 srm rs6 k24s fuel system & intake advice?PLEASE
Post by: ddillenger on March 16, 2014, 05:40:37 PM
550s are too small, so is the 85mm MAF. Fuel pump will work, but why not get the walbro 450?


Title: Re: b5 s4 srm rs6 k24s fuel system & intake advice?PLEASE
Post by: hello on March 20, 2014, 01:15:28 AM
Would you say the 95mm would be better? Also szrat28, are you or do you think you'll ever want to run e85? Either or, I would agree the 550cc are a little too small


Title: Re: b5 s4 srm rs6 k24s fuel system & intake advice?PLEASE
Post by: TurboNick on May 31, 2014, 11:56:49 AM
You're talking about running massive turbos on tiny injectors. The 550s are fine for people running with K04sbut id suggest going with a 740cc injector or bigger. The K24s can pump alot more air than the K03s so you will need to match that with everything else.


Title: Re: b5 s4 srm rs6 k24s fuel system & intake advice?PLEASE
Post by: ddillenger on May 31, 2014, 12:17:19 PM
The 60lb ev14s and RS4 MAF are perfect for 26-27psi.

Any more, and it's 95mm and 750s.