|
Title: FGTech Galletto 3 V53 doesnt work Post by: UM-Olli-92 on March 19, 2014, 02:13:08 PM Good evening guys ! (10 pm already in Berlin ^^)
Today I received my new Galletto 3 V53 clone from ebay. (this one: http://www.ebay.de/itm/FG-Tech-Galletto-3-Master-Version-V53-Chip-Tuning-TRICORE-EDC17-EDC15-uvm-/251457499396?pt=Elektroger%C3%A4te&hash=item3a8c08f104) I can not make it work >:( >:( >:( I installed the dongle driver and the FTDI driver for the clone interface. Dongle and interface are plugged in but when I try to start the EOBD2.exe it says: "Make renewal..." The seller from ebay gave the advice to me, to set the system date to 30.12.2012 But nothing works... :'( What can I do ? Thanks ! Title: Re: FGTech Galletto 3 V53 doesnt work Post by: userpike on March 19, 2014, 10:26:40 PM Good evening guys ! (10 pm already in Berlin ^^) Today I received my new Galletto 3 V53 clone from ebay. (this one: http://www.ebay.de/itm/FG-Tech-Galletto-3-Master-Version-V53-Chip-Tuning-TRICORE-EDC17-EDC15-uvm-/251457499396?pt=Elektroger%C3%A4te&hash=item3a8c08f104) I can not make it work >:( >:( >:( I installed the dongle driver and the FTDI driver for the clone interface. Dongle and interface are plugged in but when I try to start the EOBD2.exe it says: "Make renewal..." The seller from ebay gave the advice to me, to set the system date to 30.12.2012 But nothing works... :'( What can I do ? Thanks ! Use Galletto that works! Check out the first stickied thread in the flashing and chipping section of the forum. Title: Re: FGTech Galletto 3 V53 doesnt work Post by: UM-Olli-92 on March 20, 2014, 03:02:54 PM I want that Galletto 3 because of the BDM functions.
I need to read and write EDC17 and MED17 (Galletto 1260 doesnt work for me) Title: Re: FGTech Galletto 3 V53 doesnt work Post by: prj on March 20, 2014, 03:40:07 PM If you are going to read and write EDC17 and MED17, where the ECU's cost thousands of euros, why the f... are you using a china clone???
Title: Re: FGTech Galletto 3 V53 doesnt work Post by: IamwhoIam on March 27, 2014, 08:48:06 AM because cheap
Title: Re: FGTech Galletto 3 V53 doesnt work Post by: sonique on March 27, 2014, 02:24:54 PM set date 2013.01.01
use windows Xp sp3 and use Fgfix and reginal options install asian lang... (http://s6.ifotos.pl/img/22JPG_ehxwrxe.JPG) last options maybe not work ftdi update use mprog and load ept file |