|
Title: Wiring New Diagnostic Port- pin connectors Post by: phila_dot on May 01, 2011, 11:56:59 AM I have a new OEM Audi diagnostic port (female obviously) part number 8D0-972-695 and cannot find the correct pin connectors anywhere.
What pin connectors should be used and where to get them? I will be using this in my bench harness. Title: Re: Wiring New Diagnostic Port- pin connectors Post by: julex on May 01, 2011, 12:13:20 PM I have a new OEM Audi diagnostic port (female obviously) part number 8D0-972-695 and cannot find the correct pin connectors anywhere. What pin connectors should be used and where to get them? I will be using this in my bench harness. Sticky on top, "bench flashing"... Pinouts are there... Title: Re: Wiring New Diagnostic Port- pin connectors Post by: Tony@NefMoto on May 01, 2011, 12:21:03 PM I have bought parts from CarPlugs.com in the past: http://www.carplugs.com
There is also Obd2Cables.com: http://www.obd2cables.com Title: Re: Wiring New Diagnostic Port- pin connectors Post by: phila_dot on May 01, 2011, 12:31:54 PM I have a new OEM Audi diagnostic port (female obviously) part number 8D0-972-695 and cannot find the correct pin connectors anywhere. What pin connectors should be used and where to get them? I will be using this in my bench harness. Sticky on top, "bench flashing"... Pinouts are there... Thanks, but not what I'm looking for. I need the physical pin connectors. I have bought parts from CarPlugs.com in the past: http://www.carplugs.com There is also Obd2Cables.com: http://www.obd2cables.com Thanks Tony. That was all I could find as well, but I was hoping to be able to find them local. I guess I will just have to place an order or get one with a pig-tail from the junkyard. Title: Re: Wiring New Diagnostic Port- pin connectors Post by: coreyj03 on May 01, 2011, 07:00:30 PM you could buy the pins from the dealer... probably around $20 for 2 pins with about 2 feet of wire. best bet is to just go to junk yard for a couple bucks.
|