|
Title: 2004 VW Passat 1.8 T help please Post by: koziolek on April 05, 2014, 10:03:34 PM Im having a problem with this car
18089/P1681/005761 - Control Module Programming Not Finished first time this code came after i read the file for tunning, car does not start i erased the code the car started once i turned off the car the code came again the car didnt start. i erased the code again and the car still didnt star i tried the original file for this module ,same thing happened the car stared once i tried the tuned file the same thing after each programming vehicle started once and the same problem come back i need help please should I just buy used ecm module from scrap and somehow get the pin code and code it to the vehicle bosch part # 0 261 208 291 ME 7.5 0002 its automatic Title: Re: 2004 VW Passat 1.8 T help please Post by: ddillenger on April 05, 2014, 10:24:07 PM Flash with nefmoto. When finished, turn key off for 10 seconds, then on for 30 seconds without starting the car. Then, cycle the key and try starting it. If you still have the code, you should consider switching to a different software version.
Title: Re: 2004 VW Passat 1.8 T help please Post by: RaraK on April 23, 2014, 01:26:56 PM Or....you can remove the DTC as this works on SOME ecu's. Its worth a try on this image, i know the 2005/2006 G/J images work by removing dtc only when making flashes with Nefmoto Flash software.
Title: Re: 2004 VW Passat 1.8 T help please Post by: ddillenger on April 23, 2014, 01:40:50 PM I delete the code in the 032RN MKIV binaries.
|