|
Title: A4 -95 1.8T AEB ecu change (IMMO questions) Post by: teme69 on April 14, 2014, 02:59:47 AM I need to do a ecu swap for audi a4 1995 with AEB engine. Ecu is ME3.8.2 I think(?) and the car has separate immo box.
Ecu number is 8D0907557 Bosch number 0261203550/551. Original ecu got somehow fried and the car is not starting anymore (Immo light goes off when trying to start). I have another used AEB ecu with matching part numbers but the immo is causing troubles. What options do I have to get my car runnig with the spare ecu? Could I just desolder eeprom 24C02 from my old ecu and solder it in the spare one? I know that one option is to read contents of the original 24C02 and then write spare one with it, right? But what is the difference if I replace the whole 24C02 chip? Unfortunately I do not have any eeprom programmer so I could read/write the eeprom so any code swap/immo off mod would be hard to do. It would be much appreciated if someone could help me. Title: Re: A4 -95 1.8T AEB ecu change (IMMO questions) Post by: ddillenger on April 14, 2014, 08:38:00 AM Yes, swapping the 24C02 would be fine.
Title: Re: A4 -95 1.8T AEB ecu change (IMMO questions) Post by: teme69 on April 14, 2014, 09:42:37 AM Yes, swapping the 24C02 would be fine. Great news! Thank you very much! |