Title: pj rs6 base file for s4, ev14 550 , 90mm maf cant find CWMDAPP? Post by: BraxS4 on April 15, 2014, 09:48:31 AM hey guys thanks for any advice, ive gone through hours of the forums and advice here and there, so far ive
scaled maf for 90mm edited krkte and tvub for ev set FKKVS to 1s KFKHFM to 1s KFLDRAPP to 0s' disabled egt's "dead" and rear o2 "still wired for zeitronix" i cannot find CWMDAPP to set to 8 im using tuner pro, am i going in the correct direction? thanks guys Title: Re: pj rs6 base file for s4, ev14 550 , 90mm maf cant find CWMDAPP? Post by: BraxS4 on April 15, 2014, 10:48:54 AM and yes ive tried different m box xdf's.... maybe try a non m box?
Title: Re: pj rs6 base file for s4, ev14 550 , 90mm maf cant find CWMDAPP? Post by: ddillenger on April 15, 2014, 11:05:36 AM 181BD
Title: Re: pj rs6 base file for s4, ev14 550 , 90mm maf cant find CWMDAPP? Post by: BraxS4 on April 15, 2014, 11:15:58 AM ive searched for hex address with tuner pro.... comes up with nothing, i tried to add the scaler but did something wrong. can i open the xdf in text and maybe add a value? anyone have this if so?
Title: Re: pj rs6 base file for s4, ev14 550 , 90mm maf cant find CWMDAPP? Post by: catbed on April 15, 2014, 01:31:27 PM That scalar you created was correct. Stock value is 0
Title: Re: pj rs6 base file for s4, ev14 550 , 90mm maf cant find CWMDAPP? Post by: BraxS4 on April 15, 2014, 07:04:40 PM awesome, ill re attempt thanks
|