NefMoto

Technical => Tuning => Topic started by: AudiRolla on April 18, 2014, 12:49:35 PM



Title: n00b but ready to learn
Post by: AudiRolla on April 18, 2014, 12:49:35 PM
I have done a lot of reading lately in this forum and everything I have read is very much appreciated. Is there anyone here who is willing to give me the details for tuning. I know what I need but I need some details on setting everything up. I promise all you have to do is tell me once or point me in the right direction.  Ex. Setting up ecu file in me7 logger, my vag cable wont communicate with nefmoto or me7logger, set number in the ecu binary that need to be constant for fueling, maf, boost, n75 duty cycle, timing angle, knock, retardation, ecu correction parameters, the most efficient way to flash from experience, torque, tranny values etc. I know its a lot but anyone who is willing to through some direct knowledge my way I am willing to donate to the site or those individuals. Thank you all very much.


Title: Re: n00b but ready to learn
Post by: ddillenger on April 18, 2014, 01:50:58 PM
Please read this:

http://s4wiki.com/wiki/Tuning

And the stickys. Pretty much every question you asked can be answered with a couple hours worth of reading.

Start by loading the VCDS software, and insuring your cable isn't set to boot in intelligent mode in the options menu.

Welcome, and good luck.


Title: Re: n00b but ready to learn
Post by: AudiRolla on April 18, 2014, 03:54:20 PM
Thank you