|
Title: issue with NLS antilag Post by: _nameless on April 21, 2014, 06:00:30 PM I added NLS and anti lag table to a mk4, when floored it will rev threw the rpm set point... strange thing is that it cuts for a split second then over revs. I checked clutch switch and changed 95% to 10% to be sure it wasn't a problem with that. Any ideas?
Thanks Marty Title: Re: issue with NLS antilag Post by: maZer.GTi on April 22, 2014, 12:38:40 AM I added NLS and anti lag table to a mk4, when floored it will rev threw the rpm set point... strange thing is that it cuts for a split second then over revs. I checked clutch switch and changed 95% to 10% to be sure it wasn't a problem with that. Any ideas? Thanks Marty We cannot help you without to take a look at your file. Title: Re: issue with NLS antilag Post by: _nameless on April 22, 2014, 08:23:48 AM We cannot help you without to take a look at your file. Thanks for the reply... when I get him I will upload it... the thing I don't understand is that it worked fine on another car same software number but over revs with a spit second cut? Would this be software related? |