|
Title: Audi A6 4F 3.0T SIMOS 8.3 can´t tune? :( Post by: auamanu on April 24, 2014, 12:33:40 PM Hello,
i´m from germany and i have a problem :( I have a USP Motorsport Air Intake and a custom exhaust. Now i would like tune my A6 up to 400-430hp on the crank. My tuner say´s, my ECU can´t flashed with a new software and i can do nothing to change this! CMDFlash say`s, ECU`s with SOP8 chip can´t flash, i have the SOP8 chip -.- http://cmd.flashtec.ch/images/Sim8.2_pcb.jpg (http://cmd.flashtec.ch/images/Sim8.2_pcb.jpg) The car is a Audi A6 C6 3.0T ModelYear 2010 Quattro TipTronic. The ECU is a Simos 8.3 (more details see the attachment). Can i change the ECU to other? Or where can flash my ecu? APR? (http://s7.directupload.net/images/140424/temp/9n5po7qx.jpg) (http://www.directupload.net/file/d/3602/9n5po7qx_jpg.htm) (http://s1.directupload.net/images/140424/temp/2mtobnpw.jpg) (http://www.directupload.net/file/d/3602/2mtobnpw_jpg.htm) Title: Re: Audi A6 4F 3.0T SIMOS 8.3 can´t tune? :( Post by: nyet on April 24, 2014, 12:37:38 PM Unfortunately, there is very little publicly available SIMOS information out there...
Title: Re: Audi A6 4F 3.0T SIMOS 8.3 can´t tune? :( Post by: Aurélien on April 24, 2014, 01:41:54 PM Where are you in germany ? I may have a solution but I don't have time to implement it.
If you are in a hurry, go APR or REVO. Maybe OCT can do it also. Title: Re: Audi A6 4F 3.0T SIMOS 8.3 can´t tune? :( Post by: IamwhoIam on April 25, 2014, 08:53:41 AM Buy a byteshooter (official, including 4.xx update AND SIMOS module) and then you'll be able to &^%"£ around with your ECU as much as you please.
Title: Re: Audi A6 4F 3.0T SIMOS 8.3 can´t tune? :( Post by: IamwhoIam on April 25, 2014, 09:07:14 AM Sorry, it seems I had misread your post. My advice is actually: go to a tuner who doesn't use shitty spaghetti tools and you'll be all set.
Title: Re: Audi A6 4F 3.0T SIMOS 8.3 can´t tune? :( Post by: auamanu on June 17, 2014, 02:47:17 PM Byteshooter and original CMDFlash can't tune this ECU :(
It's possible to install a ECU from S5 or S4 in the A6? Title: Re: Audi A6 4F 3.0T SIMOS 8.3 can´t tune? :( Post by: k0mpresd on June 17, 2014, 03:10:07 PM x17 lists 8.3 but doesnt mention anything about sop8 or sop14.
Title: Re: Audi A6 4F 3.0T SIMOS 8.3 can´t tune? :( Post by: IamwhoIam on June 19, 2014, 03:51:04 AM Byteshooter and original CMDFlash can't tune this ECU :( It's possible to install a ECU from S5 or S4 in the A6? Byteshooter 4.x can DEFINITELY and 100% do these Title: Re: Audi A6 4F 3.0T SIMOS 8.3 can´t tune? :( Post by: k0mpresd on August 18, 2014, 07:53:45 PM had one of these today with soic8. x17 did not work.
Title: Re: Audi A6 4F 3.0T SIMOS 8.3 can´t tune? :( Post by: IamwhoIam on August 19, 2014, 07:21:24 AM Funny how they claim they can do them all :D
|