|
Title: KFLF rl axis limited to 191% ? Post by: elRey on May 02, 2014, 05:01:14 PM Is the KFLF rl axis limited to 191% (FF) ? or do I have my map defined incorrectly?
If it is capped @ 191% wouldn't that mean the rl (byte) variable is also capped at 191% ? Title: Re: KFLF rl axis limited to 191% ? Post by: phila_dot on May 02, 2014, 05:52:15 PM Yes to both
Title: Re: KFLF rl axis limited to 191% ? Post by: elRey on May 02, 2014, 06:02:38 PM :(
So KFLF is no good for higher boost. boooo Title: Re: KFLF rl axis limited to 191% ? Post by: prj on May 03, 2014, 03:58:44 PM You should not even be using that map.
I personally replaced the rl axis with pvdk and use it for fuel correction for MAP activated methanol injection kits. Title: Re: KFLF rl axis limited to 191% ? Post by: marrakech on November 01, 2014, 04:44:15 AM What is an RL?
Title: Re: KFLF rl axis limited to 191% ? Post by: nyet on November 01, 2014, 10:59:43 AM You should not even be using that map. I personally replaced the rl axis with pvdk and use it for fuel correction for MAP activated methanol injection kits. Necro bump from the noob above... but that is a great idea! Title: Re: KFLF rl axis limited to 191% ? Post by: hammersword on November 03, 2014, 05:04:04 PM ME7 is very smart ECU... Even if KFLF limits RL at 191.7% you can easily run 2+bar with MAFless setup by a small tweaking on FKKVS map
It is a good idea if you change the axis from RL to PVDK but you can easily see that 2550mbar = 191.7%, unless you change map sensor |