|
Title: noobie needing help with launch control Post by: khile on May 03, 2014, 04:23:23 AM hi all new to nefmoto and a friend wants me to add launch control to his 2.7t a6
im following guide here: http://www.nefariousmotorsports.com/wiki/index.php/Adding_anti-lag_launch_control_and_no-lift_shift im on section 4 but unable to find the offsets in the file im using HxD to look at file but unable to locate the offset any help would be really great :-) Title: Re: noobie needing help with launch control Post by: cerips on May 03, 2014, 05:55:25 AM Posting a read of his ecu would probably help ;)
Title: Re: noobie needing help with launch control Post by: khile on May 03, 2014, 12:03:43 PM file is attached whats best program to add the hex edit in as ive tried HxD and just a generic hex editor i found on line
Title: Re: noobie needing help with launch control Post by: cerips on May 03, 2014, 03:20:57 PM That's a 551C ECU, there's a definition file for it http://nefariousmotorsports.com/forum/index.php?topic=3633.0
Title: Re: noobie needing help with launch control Post by: khile on May 04, 2014, 02:15:31 AM For step 4 on the guide whats best program to add the hex subroutine into please
thanks for all help Title: Re: noobie needing help with launch control Post by: cerips on May 04, 2014, 02:42:10 AM If you can't alter 4 bytes in a file I suggest you are out of your depth here and need to do some more reading!
Title: Re: noobie needing help with launch control Post by: khile on May 04, 2014, 02:48:18 AM im trying but Hxd cant seem to fine the hex string in the file
|