|
Title: MED 7(9) vs SIMOS 10 Post by: n_joe on May 09, 2014, 07:22:48 AM Hi, is there the similarities between two systems or they totally different?
Title: Re: MED 7(9) vs SIMOS 10 Post by: panos1975 on May 09, 2014, 09:47:22 AM BOSCH vs SIEMENS....The basic idea of the system is the same(the main components of the system are the same)but the structure of the two ecus as far as i know is absolutely different.every ecu maker has his own architecture...
Title: Re: MED 7(9) vs SIMOS 10 Post by: n_joe on May 09, 2014, 12:22:14 PM Yes, as written in ssp 443, same functions as in MED17. In SIM10 mappack i see eight 4x16 Knock control, one 8x8 Drivers Wish and nine 12x12 Drivers Wish, 10x12 and 10x8 Rail Pressure, two 6x16 Max. filling boost, one 8x12 boost duty cycle, one 8x13 and 8x10 torque, one 8x8 lambda, two 12x16 spark advance, one 12x16 Map for optimum torque, one 12x16 Target filling. I'm trying to compare them with MED and have issues.
Title: Re: MED 7(9) vs SIMOS 10 Post by: Rick on May 10, 2014, 02:53:17 AM That map pack sounds like it's from Swiftec and won't help you much.
Title: Re: MED 7(9) vs SIMOS 10 Post by: n_joe on May 10, 2014, 04:50:38 AM May be. I don't know. There is no info on the net about subj. Done remapping "max. boost filling" today and i think it works.
With Drivers Wish - i'm unsure, that it's correct. Title: Re: MED 7(9) vs SIMOS 10 Post by: Rick on May 10, 2014, 05:08:21 AM what engine is it? 1.2?
Title: Re: MED 7(9) vs SIMOS 10 Post by: n_joe on May 10, 2014, 05:30:50 AM Yes, 1.2 TSI.
Title: Re: MED 7(9) vs SIMOS 10 Post by: terminator on May 10, 2014, 06:42:57 AM All siemens I have seen, have pretty similiar DW maps. Dont worry this are DW maps.
Title: Re: MED 7(9) vs SIMOS 10 Post by: Rick on May 10, 2014, 07:15:54 AM it's a factor, and should be left alone.
Title: Re: MED 7(9) vs SIMOS 10 Post by: n_joe on May 10, 2014, 07:27:58 AM Rick, could you explain in detail? What means 1.0 - relative torque?
x-axis - pedal travel or what? Title: Re: MED 7(9) vs SIMOS 10 Post by: terminator on May 10, 2014, 07:32:59 AM Ok, its not DW, its "Driver interpretation map" ip_fac_tq_req_driv
Title: Re: MED 7(9) vs SIMOS 10 Post by: Rick on May 10, 2014, 07:36:13 AM 1.0 means 100% of torque. 0.5 50%.
So 1.0 means full power. Title: Re: MED 7(9) vs SIMOS 10 Post by: terminator on May 10, 2014, 07:38:56 AM Why do you want to change it? Its not like Bosch diesel DW in NM, it will not give you any additional power since the values are not requested NM, but factor.
Title: Re: MED 7(9) vs SIMOS 10 Post by: n_joe on May 10, 2014, 07:52:42 AM My goals: smooth start and eliminating of pedal lag as much as possible :)
Title: Re: MED 7(9) vs SIMOS 10 Post by: n_joe on August 28, 2014, 08:10:29 AM Continuing previous message. In simos10 we have maps called "time constant for torque decrease" and "time constant for torque increase" - ip_t_dec_tra_1 (_2,_3) and ip_t_inc_tra_1 (_2,_3) respectively, for "normal" and "sport" mode, thus 12 maps total. What do you think means "1", "2", "3"?
|