|
Title: 95040 immo off Post by: RaraK on May 09, 2011, 08:06:58 PM Immo off, VIN removed.
Title: Re: 95040 immo off Post by: julex on June 08, 2011, 06:26:26 AM Immo off, VIN removed. Can you elaborate? Is this cluster dump? Title: Re: 95040 immo off Post by: bazaa on June 08, 2011, 09:38:45 AM Immo off, VIN removed. Can you elaborate? Is this cluster dump? Title: Re: 95040 immo off Post by: phila_dot on June 08, 2011, 10:48:40 AM The 95040 reference tells me ECU EEPROM.
Title: Re: 95040 immo off Post by: RaraK on June 22, 2011, 01:43:18 PM The 95040 reference tells me ECU EEPROM. Yes you are correct, dump that contains IMMO, SKC, etc.... Title: Re: 95040 immo off Post by: JBL-GG on May 08, 2012, 07:04:39 AM should this dump run at every Me7.5 ecu using 95040 eeprom, do i have to make
checksum or something, or do i just have to flash it to the eeprom? can i flash it without problems, using a willelm programmer? Thx in advance Title: Re: 95040 immo off Post by: automan001 on July 03, 2012, 01:44:17 PM Checksum seems to me OK in the file, verified using EEPROM 95040 Checksum calculator
Have anybody tried this eeprom dump? Immo is OFF that's clearly seen. How does the clear/empty VIN number work? Is it auto populated when connected with instrument cluster? Title: Re: 95040 immo off Post by: Racingbeat on August 13, 2012, 11:57:45 PM Has anybody been able to verify that this does indeed work? Thanks for sharing OP.
Title: Re: 95040 immo off Post by: amir2020 on August 15, 2012, 04:21:11 AM Immo off, VIN removed. Is it possible to tell me what are the cars that are working on these files And Do you work at Toyota Title: Re: 95040 immo off Post by: AARDQ on August 29, 2012, 07:02:53 PM I've used this with a 4Z7907551S and a 4Z7907551AA -- reading these boxes using the Nefmoto tool sets the Programming Not Finished bit, and this '95040 immo off' was a lifesaver.
Title: Re: 95040 immo off Post by: Mantis on December 06, 2012, 03:27:28 PM I am trying to use this tool, this file appears to force a galleto tool close whenever I try to write. Has anyone else experienced this, is there a work around
Title: Re: 95040 immo off Post by: prj on December 06, 2012, 03:36:46 PM You can't write the EEPROM with Galletto.
Title: Re: 95040 immo off Post by: Mantis on December 06, 2012, 03:59:53 PM OK, is this tool meant ot be used with Nefmoto software
Title: Re: 95040 immo off Post by: k0mpresd on December 06, 2012, 06:58:35 PM the file posted in this thread is not a "tool".
i think you need to maybe read more and you will answer your own question. obviously you arent really sure what youre doing. Title: Re: 95040 immo off Post by: Mantis on December 10, 2012, 08:13:02 PM I agree, I am new to flashing. I didn't find anywhere else where this ECU EEPROM dump was discussed.
Title: Re: 95040 immo off Post by: k0mpresd on December 10, 2012, 08:38:43 PM so you would rather press the flash button and cross your fingers rather than actually know anything about it?
http://nefariousmotorsports.com/forum/index.php?topic=1168.0title= |