|
Title: EDC15P+ Immo flasher program - open source Post by: JohnJocke on May 13, 2014, 10:51:45 PM Greetings
I didn't find any existing program to read/write the 24c04 immo eeprom of the EDC15P+ through K-line (with a dumb KKL cable). Therefore I wrote a program that can read and write the contents of the immo eeprom in boot mode. I got the idea from ArgDub's great ME7_95040 EEPROM programmer. Just use a normal dumb KKL cable and start the ECU in boot mode. 8) Download the program here (.NET framework 4 required): https://bitbucket.org/JohnJocke/edc15p_immo_flasher/downloads/EDC15P_Immo_flasher_2014_05_13_v1.0.zip I tested the program with EDC15P+. Dunno if it works with other EDC15 variants. Complete source code with BSD license can be found here: https://bitbucket.org/JohnJocke/edc15p_immo_flasher/src Btw, if someone knows how to read the eeprom with OBD (KWP1281) without security pin code, please drop a hint. ;) Title: Re: EDC15P+ Immo flasher program - open source Post by: _nameless on May 13, 2014, 10:55:45 PM Greetings 1 hell of a first post nice welcome and thank you for sharing 8)I didn't find any existing program to read/write the 24c04 immo eeprom of the EDC15P+ through K-line (with a dumb KKL cable). Therefore I wrote a program that can read and write the contents of the immo eeprom in boot mode. I got the idea from ArgDub's great ME7_95040 EEPROM programmer. Just use a normal dumb KKL cable and start the ECU in boot mode. 8) Download the program here (.NET framework 4 required): https://bitbucket.org/JohnJocke/edc15p_immo_flasher/downloads/EDC15P_Immo_flasher_2014_05_13_v1.0.zip I tested the program with EDC15P+. Dunno if it works with other EDC15 variants. Complete source code with BSD license can be found here: https://bitbucket.org/JohnJocke/edc15p_immo_flasher/src Btw, if someone knows how to read the eeprom with OBD (KWP1281) without security pin code, please drop a hint. ;) Title: Re: EDC15P+ Immo flasher program - open source Post by: eliotroyano on May 14, 2014, 03:27:13 AM 1 hell of a first post nice welcome and thank you for sharing 8) ;D ;D ;D great first postTitle: Re: EDC15P+ Immo flasher program - open source Post by: scaro on August 05, 2014, 12:03:10 PM Nice post.
But i have a problem. I get error when i try to start the program. Somebody else have same problem? Title: Re: EDC15P+ Immo flasher program - open source Post by: TheDSI on August 05, 2014, 02:10:31 PM Greetings I didn't find any existing program to read/write the 24c04 immo eeprom of the EDC15P+ through K-line (with a dumb KKL cable). Therefore I wrote a program that can read and write the contents of the immo eeprom in boot mode. I got the idea from ArgDub's great ME7_95040 EEPROM programmer. Just use a normal dumb KKL cable and start the ECU in boot mode. 8) Download the program here (.NET framework 4 required): https://bitbucket.org/JohnJocke/edc15p_immo_flasher/downloads/EDC15P_Immo_flasher_2014_05_13_v1.0.zip I tested the program with EDC15P+. Dunno if it works with other EDC15 variants. Complete source code with BSD license can be found here: https://bitbucket.org/JohnJocke/edc15p_immo_flasher/src Btw, if someone knows how to read the eeprom with OBD (KWP1281) without security pin code, please drop a hint. ;) many softeware are able to read it OBD .... pass for eeprom access must be 12233 Title: Re: EDC15P+ Immo flasher program - open source Post by: aef on August 05, 2014, 10:23:33 PM Great first post ;)
Can you please describe how to get edcXX into boodmode? Title: Re: EDC15P+ Immo flasher program - open source Post by: scaro on August 06, 2014, 02:03:09 AM For edc15p+ connect pin 24 29f400 flash to GND Power ON ECU After about maybee 3-5 sec disconnect pin 24 from GND "AEF" Is the program starting for you? Title: Re: EDC15P+ Immo flasher program - open source Post by: _nameless on August 09, 2014, 05:43:56 AM Why isn't this a sticky ?
Title: Re: EDC15P+ Immo flasher program - open source Post by: scaro on August 24, 2014, 12:42:54 PM I cant get the prog to work i have tested it on different computers. Both xp and win7. Dont know what i do wrong? Somebody else have this problem?
Title: Re: EDC15P+ Immo flasher program - open source Post by: JohnJocke on August 25, 2014, 11:08:59 AM I cant get the prog to work i have tested it on different computers. Both xp and win7. Dont know what i do wrong? Somebody else have this problem? What kind of error do you receive? The application should require Microsoft .NET framework 4.0. If that doesn't work maybe you could try installing also .NET framework 3.5. Title: Re: EDC15P+ Immo flasher program - open source Post by: scaro on September 24, 2014, 09:55:37 AM I downloaded the program on another forum and it worked. I tried download from this forum again (have tried many times before) and now it works here to. Strange, but thanks for the program. :)
|