|
Title: DAMOS for Audi S3 2.0TFSI MED9.1 Post by: auamanu on May 18, 2014, 04:02:56 AM Hello,
i need a DAMOS for a Audi S3 8P 2.0TFSI 0261S02342 8P0907115H Software 387473 Can anybody help me? All Damos i had for 9.1 not right for this :( I´ve changed the offset, but many maps are different :( Title: Re: DAMOS for Audi S3 2.0TFSI MED9.1 Post by: ddillenger on May 18, 2014, 08:56:52 AM Hello, i need a DAMOS for a Audi S3 8P 2.0TFSI 0261S02342 8P0907115H Software 387473 Can anybody help me? All Damos i had for 9.1 not right for this :( I´ve changed the offset, but many maps are different :( It is very rare you find a damos that lines up with a production file (at least publicly). If you have a similar damos, just transfer the maps you need one by one. Title: Re: DAMOS for Audi S3 2.0TFSI MED9.1 Post by: auamanu on May 18, 2014, 03:04:15 PM All my med9.1 damos are to different to compair it with this ecu :(
Title: Re: DAMOS for Audi S3 2.0TFSI MED9.1 Post by: ddillenger on May 18, 2014, 03:16:21 PM All my med9.1 damos are to different to compair it with this ecu :( Bullshit. Post it. I guarantee I can find anything within minutes. Title: Re: DAMOS for Audi S3 2.0TFSI MED9.1 Post by: oldcarguy85 on May 18, 2014, 03:18:03 PM Look up member name basano. He's been doing loads of work on this file. Idk if he posted a definition but he might be able to help u out. At a minimum, his posts are very good and will help u learn.
Title: Re: DAMOS for Audi S3 2.0TFSI MED9.1 Post by: ddillenger on May 18, 2014, 09:44:43 PM Post the original file :O
Title: Re: DAMOS for Audi S3 2.0TFSI MED9.1 Post by: RaraK on May 20, 2014, 08:48:39 PM Original
Title: Re: DAMOS for Audi S3 2.0TFSI MED9.1 Post by: hammersword on May 23, 2014, 08:41:52 AM MED9s are very similar each other except a small difference on the early MED9 from AXX with 2x KFMIRL etc
I use just 1 damos from production ECU version for any 2.0TFSi MED9 image.... no need to get all versions... You only need to know map locations in MED9 Title: Re: DAMOS for Audi S3 2.0TFSI MED9.1 Post by: ddillenger on May 23, 2014, 08:58:13 AM All my med9.1 damos are to different to compair it with this ecu :( As I figured, it's very similar to every other MED9. Title: Re: DAMOS for Audi S3 2.0TFSI MED9.1 Post by: RaraK on May 24, 2014, 08:03:47 PM Ideally, 1 from standard and 1 from k04 variants is best :) there ARE some differences on the k04 ones....however, standard remaps you are ok, finding out some specific things it helps to have the k04 variant a2l/ols projects as they have "more" in them than earlier and k03 based vehicles.
|