|
Title: KWP1281 - Linux Post by: cronic on May 26, 2014, 07:07:16 AM Hello,
i want to log my cars data(Audi a4 b5 1.6) and show them on a tiny display. Whats the easiest way to do that? It has to run on linux, because i wanna put it on my RaspberryPi, so i can view the data on the display while im driving. Maybe somone can give me a hint. Thanks and regards, cronic Title: Re: KWP1281 - Linux Post by: userpike on May 26, 2014, 08:03:10 AM Hello, i want to log my cars data(Audi a4 b5 1.6) and show them on a tiny display. Whats the easiest way to do that? It has to run on linux, because i wanna put it on my RaspberryPi, so i can view the data on the display while im driving. Maybe somone can give me a hint. Thanks and regards, cronic I think ME7logger will run on linux with the proper version available in the stickied thread in the logging section of this forum. Title: Re: KWP1281 - Linux Post by: jimmcgee5 on May 26, 2014, 10:15:02 AM I think ME7logger will run on linux with the proper version available in the stickied thread in the logging section of this forum. - Linux port added-> see "ME7Logger_Linux_DIST_10072013.tgz" Serial interfaces work using device /dev/ttyS*, as well as FTDI cables in serial mode using the kernel module ftdi_sio and device /dev/ttyUSB0. FTDI native mode is supported using libftdi1 and libusb1, both are already included in many Linux distributions. libftdi1: http://www.intra2net.com/en/developer/libftdi libusb1: http://www.libusb.org/wiki/libusb-1.0 Title: Re: KWP1281 - Linux Post by: cronic on May 29, 2014, 04:24:03 AM Hello , and thanks for reply.
I thought i need the Image of the ECU to log data with ME7? Cause the A4 B5 is using KWP protocol, isnt that true? Title: Re: KWP1281 - Linux Post by: prj on May 29, 2014, 04:03:32 PM 1.6 is siemens.
Title: Re: KWP1281 - Linux Post by: cronic on May 30, 2014, 08:50:40 AM Yes, its Siemens. Do you have an image for this?!
Title: Re: KWP1281 - Linux Post by: prj on May 30, 2014, 11:36:57 AM ME7Logger works only on Bosch ME7 (duh).
For your Siemens you will need a KWP1281 implementation. Personally I think it's a giant waste of time on the 1.6 engine. Buy something with a decent engine first :P |