|
Title: Hi guys! New to the Audi world. Looking for some advice and help. Post by: Lowfategg on May 28, 2014, 12:39:14 PM Hey everyone,
Just like to introduce myself. My first car was a Mk3 2.slow Jetta which exposed me to all things automotive, now I have a Twin Turbo 300ZX which I drive daily. :P Just got myself a dirt cheap 1997 Audi A4 1.8T Quattro for a winter car. Given I am a bit car crazy I decided to look into tuning the thing myself (super low budget build, so APR chip which costs more than the car is a no-no). What I got myself into is a mess of confusion compared to my pretty much plug and play Nissan, lol. From what I understand, my 8D0907557N ecu is not easily tune-able. I need a MPPS cable and 12volts on pin 43 which will allow me to write, but I can't read. So I would need a rip of the bin file since I don't have the tools to rip the stock chip. Next I would need to edit the bin, but since no definition file is available that seems challenging. Anyway looking for some guidance. Attached a picture of the car and ECU for those who are interested or take pity on me. Title: Re: Hi guys! New to the Audi world. Looking for some advice and help. Post by: ddillenger on May 28, 2014, 12:50:46 PM Everything you said is correct. Way to do your research. I personally run the 557P software on all M5.92 AEB cars. It's posted here, and as far as earlier motronic goes is the best defined.
If you can't find it, I will upload it. Welcome, and good luck. Title: Re: Hi guys! New to the Audi world. Looking for some advice and help. Post by: Lowfategg on May 28, 2014, 01:00:45 PM Awesome, I remember reading about using 557P. Do definition files exist for that bin? In the Nissan world I use Tunerpro (seems like you guys do as well). So that would be a XDF file, but I have read about something called a Damos file as well.
I will see if I can dig up that 557P bin. Edit: Nvm think I found it. Its a .kp file correct? Title: Re: Hi guys! New to the Audi world. Looking for some advice and help. Post by: userpike on May 28, 2014, 01:39:16 PM .kp files are WinOLS definition files.
Title: Re: Hi guys! New to the Audi world. Looking for some advice and help. Post by: nyet on May 28, 2014, 02:20:52 PM FYI there is a .kp to .xdf converter (mapdump) that comes with ecuxplot
Title: Re: Hi guys! New to the Audi world. Looking for some advice and help. Post by: k0mpresd on May 28, 2014, 02:26:08 PM worth noting its a roll of the dice if youll be able to flash that 557n. most with that label will flash but ive had a few that wont.
Title: Re: Hi guys! New to the Audi world. Looking for some advice and help. Post by: _nameless on May 31, 2014, 04:45:35 AM if you need winols pm me and ill send you the direct dl link
Title: Re: Hi guys! New to the Audi world. Looking for some advice and help. Post by: ricekikr on May 15, 2015, 05:14:01 PM Everything you said is correct. Way to do your research. I personally run the 557P software on all M5.92 AEB cars. It's posted here, and as far as earlier motronic goes is the best defined. If you can't find it, I will upload it. Welcome, and good luck. Hi, I've been trying to find a 557P kp file. I tried the kenny kp (on a 577p), but the values don't seem to match the values on the 3.8 file on here. Would you mind posting the definition/kp file you have for the 577p? Thanks |