|
Title: Problems with 8e0909518al Post by: narf0815 on June 01, 2014, 09:15:10 AM Hi all,
after reading flash with NM my car won't start: flash memory not complete... >:( I wrote flash with NM and 8e0909518al.bin from this thread: http://nefariousmotorsports.com/forum/index.php?topic=5718.0 Now car runs but got a yellow sign from ESP in front. And i think the new file is stock ??? My one was tuned, crappy - but tuned ;) Some help for me? :'( Some Info: 01.Jun.2014 01:47:31.034: LOG: Successfully read ECU identification information 01.Jun.2014 01:47:31.044: USER: 100% complete. 01.Jun.2014 01:47:31.067: USER: Read 5 ECU info entries: 01.Jun.2014 01:47:31.086: USER: 0x92, System Supplier ECU Hardware Number: 0261208228 01.Jun.2014 01:47:31.096: USER: 0x94, System Supplier ECU Software Number: 1037368069 01.Jun.2014 01:47:31.106: USER: 0x91, Vehicle Manufacturer ECU Hardware Number: 0x0D, 8E0909018A , 0xFF 01.Jun.2014 01:47:31.115: USER: 0x9B, Calibration Date: 8E0909518AL , 0002, 0x03002CED, 0x01000000, 0x0000, 1.8L R4/5VT , G 01.Jun.2014 01:47:31.123: USER: 0x9C, Calibration Equiment Software Number: 0x00010100 Engine: BFB 163hp Year: 2003 Greetings Title: Re: Problems with 8e0909518al Post by: narf0815 on June 01, 2014, 09:57:36 AM Original File:
Title: Re: Problems with 8e0909518al Post by: tjwasiak on June 01, 2014, 10:10:46 AM You can always compare file you read from the ECU with the file you wrote into it...
Title: Re: Problems with 8e0909518al Post by: ddillenger on June 01, 2014, 10:29:06 AM You can always compare file you read from the ECU with the file you wrote into it... Flash 518AK Title: Re: Problems with 8e0909518al Post by: narf0815 on June 01, 2014, 11:41:38 AM Thank You. Will try tomorrow.
Is this a stock one too? The old one was AL. Do you mean it was the wrong one all time? The car was using gasoline like a tank in full speed... If i load my old one with winols i recieve an error, because file is modified... ??? Title: Re: Problems with 8e0909518al Post by: ddillenger on June 01, 2014, 11:44:36 AM Thank You. Will try tomorrow. Is this a stock one too? The old one was AL. Do you mean it was the wrong one all time? The car was using gasoline like a tank in full speed... If i load my old one with winols i recieve an error, because file is modified... ??? Please read this. It is causing your problem :) http://nefariousmotorsports.com/forum/index.php?topic=5747.0title= Title: Re: Problems with 8e0909518al Post by: narf0815 on June 02, 2014, 03:56:41 AM Please read this. It is causing your problem :) http://nefariousmotorsports.com/forum/index.php?topic=5747.0title= Solution for the "programming not finished" error. OK. Maybe some wise words for my other questions? :-\ Title: Re: Problems with 8e0909518al Post by: ddillenger on June 02, 2014, 08:38:20 AM Search for NOREAD in your file with a hex editor. Fill that area with FF's.
Then import the file over the original (import original into winOLS first, then tuned file over top). Title: Re: Problems with 8e0909518al Post by: narf0815 on June 02, 2014, 09:56:17 AM will do that...
flashed your file and now i have a: 17881 - EVAP Leak Detection Pump: Open Circuit P1473 -- 004 -- No Signal/Communication ??? Title: Re: Problems with 8e0909518al Post by: ddillenger on June 02, 2014, 10:08:59 AM will do that... flashed your file and now i have a: 17881 - EVAP Leak Detection Pump: Open Circuit P1473 -- 004 -- No Signal/Communication ??? CDLDP 181A8 change it from 01 to 00. Title: Re: Problems with 8e0909518al Post by: narf0815 on June 02, 2014, 10:19:26 AM No winols available... Is ist save to drive with this?
Title: Re: Problems with 8e0909518al Post by: _nameless on June 02, 2014, 10:22:12 AM No winols available... Is ist save to drive with this? yes its just the north american version of the software we have crap you dont... like thatTitle: Re: Problems with 8e0909518al Post by: narf0815 on June 02, 2014, 01:29:06 PM CDLDP 181A8 change it from 01 to 00. Can you please check the file against yours if it is correct? Title: Re: Problems with 8e0909518al Post by: ddillenger on June 02, 2014, 01:33:13 PM Can you please check the file against yours if it is correct? A+! Title: Re: Problems with 8e0909518al Post by: narf0815 on June 02, 2014, 01:50:43 PM Great. Thanks a lot.
Maybe you can look in my first posted file to give some feedback about the quality of tuning? Update: With your 518AK file i had again the "programming not finished" error. I had to Flash it 3 times until my ECU said "finished". update2: Should i open a New thread for analyze of my tuned.bin? |