|
Title: Denso 460cc Injectors latency Post by: roman_tyk on June 10, 2014, 02:18:19 PM Hi
I got injectors from rover 620ti (360cc/3bar). Now i am looking for injection latencies for good adjusting values in TVUB maps in my 1.8T bfb. Where can i get those values? injectors: MJY100460 D3184GB Title: Re: Denso 460cc Injectors latency Post by: julex on June 11, 2014, 05:21:46 AM Hi I got injectors from rover 620ti (360cc/3bar). Now i am looking for injection latencies for good adjusting values in TVUB maps in my 1.8T bfb. Where can i get those values? injectors: MJY100460 D3184GB your best chance would be to locate binary for it and get it from the maps... Title: Re: Denso 460cc Injectors latency Post by: roman_tyk on June 11, 2014, 05:37:41 AM i tried to found any ecu dump from rover 620ti but also without results ;/
Title: Re: Denso 460cc Injectors latency Post by: julex on June 12, 2014, 09:55:05 AM i tried to found any ecu dump from rover 620ti but also without results ;/ I am not surprised. NExt course of action is to have injector shop to measure this for you... but I understand it gets pricey. Title: Re: Denso 460cc Injectors latency Post by: Phasayaseng on June 12, 2014, 03:24:05 PM Hi I got injectors from rover 620ti (360cc/3bar). Now i am looking for injection latencies for good adjusting values in TVUB maps in my 1.8T bfb. Where can i get those values? injectors: MJY100460 D3184GB Hi try this. I went off of this chart. http://injector-rehab.com/shop/lag.html Title: Re: Denso 460cc Injectors latency Post by: julex on June 13, 2014, 05:40:48 AM I don't see the point in getting 330cc injectors which is basically what stock ones flow? What's the point of swap?
Title: Re: Denso 460cc Injectors latency Post by: nyet on June 13, 2014, 11:09:16 PM I don't see the point in getting 330cc injectors which is basically what stock ones flow? What's the point of swap? this Title: Re: Denso 460cc Injectors latency Post by: roman_tyk on June 14, 2014, 12:04:57 AM i bought also: 0280156012 bosch injectors 3bar/453cc/min
Think those will be more fit to my 1.8T: http://www.nord-com.net/stoni/docs/bosch_ev6.pdf |