NefMoto

So I tried reading the EEPROM from a 2003 a4 b6 cluster.... I thought it would be a good idea to start reading bins to post here and have on hand. Well I tried reading this one and at 22 percent the cluster flashed and the LCD was blank. After that I cycled the key and the speedo went to 120mph and the fuel gauge went to over full / car won't start from immo.... I called a friend with same model but next year up (2004) b6 a4 to get a read from to see if I can get this one working. After a successful read from the 2004 I wrote it to the 2003 and the cluter came to life but still wouldn't start because of immo and said deff error where the odometer LCD is. So I immo offed the ecu to get the car to start because the guy needed the car right then and was willing to deal with the immo light until a later point till this could get fix. Well after the car started all was good until the 4 wasys started flashing about 30 seconds later so I unplugged it for now... At this point I don't know what to do I don't have the orig EEPROM for the cluster, the one I got from the 2004 won't work... Vcds says there is a EEPROM error too that can't be cleared. Of anyone has any idea or can point me in a direction that would be the best this ever at this point... Honestly I don't know what I should do at this point...
Thanks
Marty   

I knew what this thread was before opening it.

I warned you about just trying to copy eeproms from one cluster to another. I warn everyone. You bricked a Bosch RB4 crypto cluster. The only way to recover it is with authentic tools.

I would PM f1torrents, or k0mpressd.

There is no other way to recover it.

Big thanks to Daz and Ian! This forum is asome! Pulled the cluster out and will have in the mail on Monday a few pics if the cluster too