|
Title: Need Eeprom dump from m-box or compatible Post by: Westfarmracing on June 23, 2014, 03:58:43 AM Hello all. Tried to search for it, but can't find any m-Box dump.
Trying to get my d-Box car/ecu to work With m-Box flash. But it wont start, no clicking in throttlr body or anything. Just dead. No error codes in VCDs besides "no errors, or DTC not supported by ecu" This makes me Wonder if it could work With 95040 from m-Box. If anyone has one, I would appreciate it so I could give this a try. Title: Re: Need Eeprom dump from m-box or compatible Post by: ddillenger on June 23, 2014, 08:36:19 AM Here you are.
Title: Re: Need Eeprom dump from m-box or compatible Post by: Westfarmracing on June 24, 2014, 12:04:09 AM Thank you very much! I will try and reply how it goes. Hope this Works, if not there must be hardware differences.
Title: Re: Need Eeprom dump from m-box or compatible Post by: ddillenger on June 24, 2014, 12:15:34 AM If you are flashing with MPPS that is the issue. Use nefmoto.
Title: Re: Need Eeprom dump from m-box or compatible Post by: Westfarmracing on June 24, 2014, 01:28:09 AM Okay? Whats the case With mpps? I have flashed another d-Box bin without issues. Is it something special With m-Box? Same if i flash With mpps in boot? I can try Nefmoto, no problem. Also have galletto, Galep psop44 and kess.
Title: Re: Need Eeprom dump from m-box or compatible Post by: tjwasiak on June 24, 2014, 03:34:45 AM MPPS is not flashing full file I assume and that is why you have issues if you are trying to cross-flash with different bin (even different SW version can be dangerous).
Title: Re: Need Eeprom dump from m-box or compatible Post by: Westfarmracing on June 24, 2014, 04:26:27 AM Aah, thanks. Maybe that's an issue.. I have the opportunity to choose "full read/Write" but maybe just try With Nefmoto or solder it simply =)
Title: Re: Need Eeprom dump from m-box or compatible Post by: ddillenger on June 24, 2014, 09:24:03 AM Aah, thanks. Maybe that's an issue.. I have the opportunity to choose "full read/Write" but maybe just try With Nefmoto or solder it simply =) That is your problem. MPPS cannot change software numbers on many ecus, even if you select full write. Use Nefmoto for the first flash. Title: Re: Need Eeprom dump from m-box or compatible Post by: _nameless on June 24, 2014, 11:27:07 AM or boot mode with mpps
Title: Re: Need Eeprom dump from m-box or compatible Post by: Westfarmracing on June 24, 2014, 11:58:57 AM Couldnt get my cable to work with nefmoto, guess boot mpps would work also. But good news, just soldered and programmed it in my Galep and wrote eeprom with bin from m-box and it worked :)
Thank you for the help guys! |