|
Title: Transfer Immo data from 95040 to Cluster Eeprom. Post by: Pampersrocker89 on June 23, 2014, 06:46:08 AM Hi there,
I've got a 06a 906 032 hn Ecu (1.8t AUQ) This Ecu makes problems by adapting the immobilizer via VCDS. Says: System n.i.o in Channel 50 when entering Login. First: i have both eeproms and both skc. Adapting definitly doesn't work the Common Way with VCds. So i thought: lets Copy the immo content from the Ecu Eeprom to the Cluster eeprom. When i swap a Cluster i usually copy 1-100 to take over mileage, keys etc. Any idea if this Works for the Ecu Eeprom too? best regards. Title: Re: Transfer Immo data from 95040 to Cluster Eeprom. Post by: jona29 on June 26, 2014, 04:49:19 PM wouldn't try copying ecu eeprom data to clocks , can transfer ecu data to another ecu np
Title: Re: Transfer Immo data from 95040 to Cluster Eeprom. Post by: turboat on June 27, 2014, 12:35:20 AM Is the ecu immo off? You cannot adapt if it is.
|