NefMoto

I've picked up a spare ECU to play with, does anyone know if I can flash an AWT with an AUQ bin?

User@USER-PC /c/Temp/NefMoto/Working
$ ME7Check.exe 4B0906018DC_euro_A4_1.8t.bin
==============================================================================
ME7Check v1.11 (c) mki, 06/2004-07/2011
Checking file 4B0906018DC_euro_A4_1.8t.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4016.31//24b/Dst01o/220301//
-> Contents of ECUID data table:
   - '0261207636'         (SSECUHN)
   - '1037362358'         (SSECUSN)
   - '4B0906018DC '       (VAG part number)
   - '0001'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

-> No errors found. File is OK.   *********************

User@USER-PC /c/Temp/NefMoto/Working
$ ME7Check.exe leon_AUQ_std.bin
==============================================================================
ME7Check v1.11 (c) mki, 06/2004-07/2011
Checking file leon_AUQ_std.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4019.02//24b/Dst01o/210201//
-> Contents of ECUID data table:
   - '0261207440'         (SSECUHN)
   - '1037360646'         (SSECUSN)
   - '06A906032HN '       (VAG part number)
   - '0001'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'


-> No errors found. File is OK.   *********************

4B0906018DC is not for AEB! It is for AWT.

Thanks, title updated. Any ideas if they are compatible?

im assuming the awt is the same as the awm... if so the maf housing is a different size the injectors are a different size. the file will flash but I know the hn is immo3 and i believe the 018dc is immo2. if so youll have a eeprom error car wont start. if you use a immo3 immo off eeprom it will start. Id check maf housing diameter and rescale and same thing with injectors... if thats what you want to do... but seems like a lot of work to do it the wrong way

I understand that OP is wanting to use AWT ECU as spare for his AUQ car and that is why he wants to flash it with AUQ software.

This AWT ECU is IMMO2 in fact.

should work fine if eeprom flashed too

If the bootrom version is the same, the ecu shouldn't brick. If the factor for KRKTE is the same, it should work.

It works. I have done DC->HN conversion last year

I've attached the eeprom for this ECU (unless I've made a massive cockup with my filesystem, this is correct), I'm pretty sure its immo 3:
EEPROM Status:
- VIN: WAUZZZ4BX2N148544 (Audi 2002 - A6 96-04, Neckarsulm, Germany; Mlada Boleslav)
- SKC: 0847
- Immobiliser: On
- Checksum: Invalid Checksum
- Size: 512bytes
- Cluster Code: 12 22 3B 59 7C 9A
- P0601 DTC: not set
- Immo ID: UZ5Z0B5128127

If this was immo2, could I flash on a immo3 eeprom to make it immo3, or is software/other stuff in the ecu different too?

You are wrong as this ECU was never used in A4 B6 (8E). It was used only in B5.5 (8D) A4s and Passats.

I'm pretty sure I named the flash file wrong when I saved it, as I think I took the ECU out of an A6 1.8t quattro, and that matches the eeprom vin lookup. Failing that I've shown the me7check for a totally different bin and wasted everyones time *will check*

ECU from 8E would be 8E0 906 018 with letter/-s suffix.

I checked, this is defo an immo 3 ECU, and its definitely from an A6, the original flash dump was incorrectly named.

Anyway, I've flashed this with an 032HN bin and it seems to work fine :)

Can and flash my AWT 4bo906018df  0261207639
Skoda AUQ _Octavia_1.8 20V Turbo_Bosch_0261207440_06A906032HN_363908_(Original).bin