|
Title: ECU Swap ?? Post by: Tune Me Up on June 24, 2014, 07:26:28 PM Hi guys
My cars ecu has the part number: 06A 906 032 HJ. Would it be possible to swap it with an ecu with the part number: 06A 906 032 DR and just copy the map file over from the HJ one using nefmoto ? Thanks ;) Title: Re: ECU Swap ?? Post by: fknbrkn on June 25, 2014, 03:06:30 AM dont think so
DR is immo2 unit and HJ is immo3 you can swap ECU and copy LDRXN & LDRXNZK maps from HJ to make it 180hp Title: Re: ECU Swap ?? Post by: Tune Me Up on June 25, 2014, 07:09:41 AM Thanks for the reply ;)
Is there anywhere that has a list showing what ECU's are immo2 and immo3 ? Title: Re: ECU Swap ?? Post by: tjwasiak on June 25, 2014, 08:14:55 AM You can check it in ETKA (even online @www.vagcat.com). You just have to know when transition from IMMO2 to IMMO3 took place.
Title: Re: ECU Swap ?? Post by: Tune Me Up on June 25, 2014, 07:25:33 PM Thanks I'll have a look ;)
From what I've been reading so far, both the HJ and the DR ECU's were fitted to my car with the AUM engine code. Title: Re: ECU Swap ?? Post by: tjwasiak on June 26, 2014, 03:38:16 AM But for different model years (it will be shown in ETKA - even if the change was during model year - it will show you VIN numbers with older and newer part).
Title: Re: ECU Swap ?? Post by: Tune Me Up on July 05, 2014, 04:15:05 PM OK thanks ;)
Is it possible to copy the eprom and EEProm through the OBD port? |