|
Title: Innovate LM2 rpm issues on 1.8t Post by: aef on July 01, 2014, 02:08:58 PM Hi,
i logged my 1.8t AGU (M3.83) with the Innovate LM2 hand held device and used the ecu-to-cluster RPM Signal. What can cause this rpm issues. Its the black line with flat tops and drops. Title: Re: Innovate LM2 rpm issues on 1.8t Post by: aef on July 01, 2014, 10:45:47 PM here is the missing image...
Title: Re: Innovate LM2 rpm issues on 1.8t Post by: eliotroyano on July 02, 2014, 10:21:44 AM Hi, i logged my 1.8t AGU (M3.83) with the Innovate LM2 hand held device and used the ecu-to-cluster RPM Signal. What can cause this rpm issues. Its the black line with flat tops and drops. I have a similar connection but with an Innovate SSI4, and I used a 2KOhm resistor as pull-up to clean the signal and have the best shape possible. I confirm it with an oscilloscope. Did you use or try with it? Title: Re: Innovate LM2 rpm issues on 1.8t Post by: aef on July 02, 2014, 10:41:53 AM I just update the Innovate Firmware and will try the 2kohm resistor aswell.
Thank you sir! |