|
Title: idle AFR problem ME 7.1, LPI system on motronic :) Post by: marrakech on July 06, 2014, 10:49:40 AM Hi everybody, i just finished my simple project with LPI + ME 7.1.
Like this one http://www.vialle.nl/index.php/en/products/lpi under motronik control. Scalling new injectors (KRKTE) and run my car... not bad. Adaptation on idle -0.5%, at part -7% When intake air temperature is hi (over 65C and higher) on idle, propane transition from a liquid phase in the gaseous and my injectors going learn.. I need some param that let me scalling my injeсtors with intake air temperature. Can anyone help me? Sorry for my very very bad english. Title: Re: idle AFR problem ME 7.1, LPI system on motronic :) Post by: marrakech on July 06, 2014, 10:59:32 AM Oh! I find something..
DLAMTANS - additive correction to KFLAMKRL based on intake temp... trying to tune this.. But this param is for part and full throttle too.. this is bad. Title: Re: idle AFR problem ME 7.1, LPI system on motronic :) Post by: nyet on July 06, 2014, 11:15:05 AM DLAMTANS - additive correction to KFLAMKRL based on intake temp... . KFLAMKRL is for knock prevention enrichment. Not what you want. Title: Re: idle AFR problem ME 7.1, LPI system on motronic :) Post by: marrakech on July 06, 2014, 11:22:46 AM Yes, this right. >:(
Title: Re: idle AFR problem ME 7.1, LPI system on motronic :) Post by: marrakech on July 07, 2014, 06:18:31 AM Any opinion? :(
|