NefMoto

ECU Files => ECU Definition Files => Topic started by: turdburglar44 on July 06, 2014, 02:19:53 PM



Title: 8E0909518F 360910
Post by: turdburglar44 on July 06, 2014, 02:19:53 PM
Still adding to this but it is has most everything you could ever need. Thanks everyone for all the help building this.

***12/20/2014
Finally got my head wrapped around this IDA craziness and decided to get my feet wet. I added a 'stock' NLS code patch to this xdf. It uses the existing rev limit logic but first checks if the clutch is pressed. if the clutch is pressed it then uses a new variable, NLSRPM, to set the rev limit. works great and is pretty fun to drive even though it isn't a real NLS. MAKE SURE TO SET NLSRPM IF YOU APPLY THE CODE PATCH.

Along with the new code I'm happy to say this xdf is slowly becoming more reliable as I am now able to verify axes via IDA.

***12/21/2014
I went nuts today. Everything in this xdf is now 100% correct verified in IDA.

***12/27/2014
Bundled with the NLS code patch, the check engine light will now flash when knock is detected.

***1/2/2017
kffwl added


Title: Re: 8E0909518F
Post by: ddillenger on July 06, 2014, 02:52:34 PM
TVUB 13FCA
KRKTE 1D740 (Factor is 0.000111 as opposed to .000167 in the AK due to processor changes).



Title: Re: 8E0909518F
Post by: turdburglar44 on July 06, 2014, 03:00:54 PM
thanks! one more question. I assume my boost PID is different somehow? none of the maps were coming up? I still havent read the me7 system strategy so I have no clue how the ecu calculates boost and duty cycle. but what could be the issue here? do they have the same maps just have slightly different values? (due to different processor clocking that makes sense to me)


Title: Re: 8E0909518F
Post by: vwaudiguy on July 06, 2014, 05:15:16 PM
There will always be "one more question" :)


Title: Re: 8E0909518F
Post by: turdburglar44 on July 06, 2014, 05:31:13 PM
haha, yea...  :-\ notice how i put four questions after that? someday i'll have all the answers.


Title: Re: 8E0909518F
Post by: turdburglar44 on August 04, 2014, 03:59:44 PM
I would like to add all the necessary codewords for sai, cat, and evap deletes. also searching for kftarx. not looking for a handout just some guidance. does anyone have a def that I could compare to? any other ways of finding these?

~thanks


Title: Re: 8E0909518F 360910
Post by: turdburglar44 on September 03, 2014, 06:56:30 PM
Updated the xdf again but I'm at my wit's end. I can't find KFTARX, KFLAMKR and KFLAMKRL (to name a few). I have compared to loads of different maps and am coming up with nothing. About to walk down the long dark path of learning disassembly but would like to have these maps defined in my tune now. Can anybody help me out?


Title: Re: 8E0909518F 360910
Post by: turdburglar44 on October 29, 2014, 06:32:54 PM
I think I may have finally found KFLAMKRL @ 1920E. I would love to test it but I'm running E85 right now...


Title: Re: 8E0909518F 360910
Post by: ddillenger on October 29, 2014, 06:36:11 PM
KFTARX 26C78, 26D68, 26E58.


Title: Re: 8E0909518F 360910
Post by: turdburglar44 on October 29, 2014, 07:02:55 PM
that was creepy. the moment I read this I was looking at the 26CXX range randomly. Thank you so much!


Title: Re: 8E0909518F 360910
Post by: turdburglar44 on November 24, 2014, 06:43:02 PM
Looking for KFMRES to solve some idle/coldstart issues. I think I found it at 11781. Does anyone agree? Not exactly sure what it's supposed to look like on a 1.8.


Title: Re:
Post by: dream3R on November 25, 2014, 03:30:36 PM
If there is no a2l then asm is the only true way.   Axis data for example,  mostly impossible to be exact  without asm or a2l.  My 2p.


Title: Re: 8E0909518F 360910
Post by: turdburglar44 on November 25, 2014, 05:07:36 PM
yea... well dang. I guess I'll just give it a shot. I've got a really good feeling about the patterns I found comparing to Mbox. Left is Mbox right is my bin.

*** edit
This ended up being the correct map. KFMRES directly followed by KFMRESK


Title: Re: 8E0909518F 360910
Post by: ktm733 on December 02, 2014, 07:10:40 PM
Is the xdf the most recent one? I'm about to do e85 tune same file. Sounds a little difficult.


Title: Re:
Post by: turdburglar44 on December 02, 2014, 07:35:44 PM
Yea it should be up to date. Its really not that bad I'm just nit picking little details.


Title: Re: 8E0909518F 360910
Post by: ktm733 on December 04, 2014, 11:04:27 PM
I read a thread about cold start issues, that you were having. is that all straightened out?


Title: Re: 8E0909518F 360910
Post by: ktm733 on December 04, 2014, 11:12:14 PM
also was wondering about kftar 1 2 3? what are these? i know they are IAT for load but which is which? or should I just 1 across the whole thing?


Title: Re: 8E0909518F 360910
Post by: turdburglar44 on December 05, 2014, 09:21:02 PM
My cold start isn't 100% yet but it starts every time. I just can't drive away immediately. I've got TARX all 1'd out. I like to let LDHBN do my IAT corrections.


Title: Re: 8E0909518F 360910
Post by: turdburglar44 on December 06, 2014, 10:51:13 AM
I'm trying to find KFNLLNST (idle speed progression after start) I thought I found it but it's not right. I'm pretty sure that will sort out any remaining cold start bugs.


Title: Re: 8E0909518F 360910
Post by: turdburglar44 on December 20, 2014, 09:35:16 PM
KFNLLNST is now in this xdf and verified working. Between that + FKSTT and KFWKSTT my car is now able to cold start and drive away immediately with no problems (on a 30 degf day). Waiting to get some colder weather to fully stress test this tune.


Title: Re: 8E0909518F 360910
Post by: turdburglar44 on December 27, 2014, 07:20:34 PM
Added CEL flash with knock detection code patch directions into the xdf. updated OP. All code is my own.


Title: Re: 8E0909518F 360910
Post by: ktm733 on December 27, 2014, 08:13:47 PM
Cel flash? As in map switching through cruise control stalk.


Title: Re:
Post by: turdburglar44 on December 27, 2014, 08:24:15 PM
Nah check engine light flash


Title: Re: 8E0909518F 360910
Post by: ktm733 on February 22, 2015, 08:31:02 PM
have you found kfmldmx? I've found it but need numbers for calculation.


Title: Re: 8E0909518F 360910
Post by: vwaudiguy on March 01, 2015, 11:43:50 AM
D stated in the second post locations for krkte and tvub that differ from the xdf. OP also states the xdf is 100% correct. Looking at the xdf the values look legit. Can anyone verify?


Title: Re:
Post by: turdburglar44 on March 01, 2015, 12:04:21 PM
When I started this thread I was using a different sw id at first. but I can guarantee that krkte is correct in the current xdf. I have verified tvub in ida but haven't tuned with it yet.


Title: Re: 8E0909518F 360910
Post by: vwaudiguy on March 01, 2015, 12:05:56 PM
Thanks!


Title: Re: 8E0909518F 360910
Post by: panos1975 on March 01, 2015, 12:20:30 PM
A good map pack for 8E0909518F.....


Title: Re: 8E0909518F 360910
Post by: turdburglar44 on January 02, 2017, 10:54:26 AM
trying to find kffwl address for this, anyone have a good me7.5 1.8t reference?


Title: Re: 8E0909518F 360910
Post by: vwaudiguy on January 02, 2017, 12:12:55 PM
KFFWL_0_A = 18B62
KFFWL_1_A = 18BF2
KFFWL_2_A = 18C82
KFFWL_3_A = 18D12