|
Title: ME7.1 RS6 4D1907558 DEATHCODE help Post by: woody on July 08, 2014, 03:15:23 AM I keep getting deathcode MIL light on and limp mode after a few weeks
i have checked my flash and eep and both check out ok? Can anyone help me out and check these files over for me please thanks Woody Title: Re: ME7.1 RS6 4D1907558 DEATHCODE help Post by: SB_GLI on July 08, 2014, 05:20:50 AM I keep getting deathcode MIL light on and limp mode after a few weeks i have checked my flash and eep and both check out ok? Can anyone help me out and check these files over for me please thanks Woody No death code in the eeprom. Title: Re: ME7.1 RS6 4D1907558 DEATHCODE help Post by: woody on July 08, 2014, 06:18:10 AM But if I flash both them files I will get the death code within 2 weeks re flash the eep and good again for another couple of weeks
Title: Re: ME7.1 RS6 4D1907558 DEATHCODE help Post by: SB_GLI on July 08, 2014, 06:32:05 AM You may need someone with ECUFix to correct your checksums in the flash.
ME7_Check says the file is fine, but I'd get it run through ecufix and see anything in the file changes and still passes ME7_Check Title: Re: ME7.1 RS6 4D1907558 DEATHCODE help Post by: woody on July 08, 2014, 08:59:50 AM Ok anyone with ecufix? That can help please
Title: Re: ME7.1 RS6 4D1907558 DEATHCODE help Post by: sweegie on July 08, 2014, 10:22:36 AM This is not checksum related - its tuner protection and triggered on maximum load exceeding a nominated value.
You need to change code to fix this, not checksums or maps ;) Title: Re: ME7.1 RS6 4D1907558 DEATHCODE help Post by: SB_GLI on July 08, 2014, 10:33:58 AM This is not checksum related - its tuner protection and triggered on maximum load exceeding a nominated value. You need to change code to fix this, not checksums or maps ;) that's crazy. did not know something like this existed. Title: Re: ME7.1 RS6 4D1907558 DEATHCODE help Post by: sweegie on July 08, 2014, 10:35:07 AM that's crazy. did not know something like this existed. Ask me how I know lol!! It's taken me a long time to find... Including learning IDA and many many late nights... Title: Re: ME7.1 RS6 4D1907558 DEATHCODE help Post by: woody on July 08, 2014, 02:29:39 PM Sweegie did u have this problem in your file?
Title: Re: ME7.1 RS6 4D1907558 DEATHCODE help Post by: sweegie on July 09, 2014, 04:01:36 AM Yes indeed - SW 367724 and everything I've seen beyond will have this issue. Not sure about prior to this, but the software looks quite different compared to older versions.
|