|
Title: Immo Off Problems Post by: Aragorn on July 12, 2014, 02:57:55 PM I desoldered the 24c02 from my 06A906018AQ and flashed on the immo off file from here:
http://nefariousmotorsports.com/forum/index.php?topic=4738.msg46897#msg46897 Now the car starts and runs, so the immo off has worked, but i've got an "Internal Control Module: Rom error" fault code. I'm not sure if i've done something wrong, or if that file is somehow faulty... Can anyone have a look at it and see? I've got the original chip (i flashed that rom onto a new blank chip) so i guess it might be worthwhile doing my own immo off on that file, but its a bit shit if that file in that thread is broken! Title: Re: Immo Off Problems Post by: Aragorn on July 12, 2014, 03:10:58 PM Attached the original rom from my ECU, plus a version that i've immo-offed, would be good if someone can take a look at what i've done and see if it looked good.
Title: Re: Immo Off Problems Post by: ddillenger on July 12, 2014, 03:34:15 PM Good.
Title: Re: Immo Off Problems Post by: fknbrkn on July 12, 2014, 03:47:41 PM would be good
Title: Re: Immo Off Problems Post by: k0mpresd on July 12, 2014, 05:28:15 PM rom error has nothing to do with the e2p file.
Title: Re: Immo Off Problems Post by: Aragorn on July 13, 2014, 02:12:03 AM Oh right?
Care to explain what it is then? It wasnt there before i flashed the immo-off file, but is there now? Could it have been some sort of unclearable fault code left over in the E2P from whoevers ECU has produced it? Title: Re: Immo Off Problems Post by: Aragorn on July 22, 2014, 05:15:22 AM Well just to follow this up flashed my immo-offed file from above and the checksum code has gone. Its all working now, so thanks :)
Evidently theres something wrong with that file in the first link, so i'll go post a warning in that thread too. |