|
Title: I have maestro 7 and I can't figure how to get high boost Post by: Ansonmusic on July 17, 2014, 06:37:32 AM I have a 1.8t aeb head Je pistons eurospec rods 3inch exhaust from the turbo and a turbonetics t3/t4 630cc injectors tt maf and I don't know if it's the tune but I can't get boost past 15psi any ideas
Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: vdubnation on July 17, 2014, 07:23:04 AM Post logs boost desired, boost actual , wgdc and anything else that you could.
Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: terminator on July 17, 2014, 07:55:44 AM If I'm right AEB controlled by m5.9, so there is no stock boost sensor.
Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: vdubnation on July 17, 2014, 09:31:23 AM take that back got my mind on me7
Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: eliotroyano on July 17, 2014, 10:28:23 AM Did you check this maps?
KFLDS - Kennfeld LDR-Sollwert KFLDTV – TV - Kennfeld für LDR KFLUL – Lastschwelle für Turbo-Überladeabschneiden (Diagnosis) Do you have any DTC? Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: Ansonmusic on July 17, 2014, 07:09:49 PM If I'm right AEB controlled by m5.9, so there is no stock boost sensor. I have a awp 04 gti with the big port aeb head and also rmr intake with hemi 80mm throttle body I was thinking its tuning why my boost doesn't go to high but I will post logs 3rd and 4th gear pullsTitle: Re: I have maestro 7 and I can't figure how to get high boost Post by: eliotroyano on July 17, 2014, 07:12:28 PM I have a awp 04 gti with the big port aeb head and also rmr intake with hemi 80mm throttle body I was thinking its tuning why my boost doesn't go to high but I will post logs 3rd and 4th gear pulls Ok then it is a AWP engine with AEB head and ME7.5 ECU ;D ;D ;D Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: vdubnation on July 18, 2014, 06:09:12 AM heheheh post your logs
Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: Ansonmusic on July 22, 2014, 11:25:45 PM heheheh post your logs Title: i have eurodyne maestro7 not getting high boost logs supplied Post by: Ansonmusic on July 22, 2014, 11:43:12 PM i have a 04 gti with built bottom end rmr intake hemi 80mm trottle body turbonetics t3/t4 630cc siemens injectors mishsimoto fmr full 3'' exhaust tt225 maf housing i would love to see 20 psi and better boost being am a complete noob to his any help would greatly be appreciated thank you
Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: nyet on July 22, 2014, 11:52:10 PM Massive boost leak, bad turbos, broken wastegate, or busted N75.
From the looks of your O2 corrections, massive boost leak. Stop what you are doing and learn how to do a pressure test. What generated this log? Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: ddillenger on July 22, 2014, 11:58:36 PM Your file is requesting 22psi. Wastegate duty cycle is 100 percent TRYING to make that boost. You have a mechanical problem.
(http://i.imgur.com/DixuToe.png) Stop driving the car until you find it. Also, only one thread is necessary for this :( Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: Ansonmusic on July 23, 2014, 06:01:44 AM I always figured it's the turbo cause the turbine housing bolt holes are all Messed up I believe the turbo leakes out the bolt holes to
Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: Ansonmusic on July 23, 2014, 06:03:00 AM It was logged with eurodyne maestro 7
Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: nyet on July 23, 2014, 09:23:58 AM Is "TPS" throttle plate sensor or accel pedal position?
Need to add it to ECUxPlot so the filters work. Title: Re: I have maestro 7 and I can't figure how to get high boost Post by: Ansonmusic on July 30, 2014, 11:50:21 AM i changed the turbo cause it was leaking exhaust hers my new log any suggestions
|